KRASKO
Teksipol SPRINT — fast-drying matt enamel for concrete
Weather-resistant matt enamel for concrete floors and screeds indoors and outdoors; dries in 1 h and can be applied in frost down to −20 °C.
Price on request
KRASKO
Poliuretol 80S (UV) — 3-in-1 polyurethane primer-enamel with titanium particles
A two-component 3-in-1 primer-enamel based on a hydroxyl-containing acrylic resin and an aliphatic isocyanate, with corrosion inhibitors and particles of metallic titanium. The gloss coating is applied to steel structures, bridges, pipelines, tanks, including water tanks, and equipment — over the Tsinkonol, Tsinkonol 2SH, Epogrunt and Fosfogrunt primers or without a primer. In two coats the coating lasts up to 20 years in temperate and cold climates, and the service temperature is from −50 to +90 °C.
Specifications
| Manufacturer | KrasKo — OOO “NPO KRASKO” |
|---|---|
| Type | primer-enamels |
| Base | two-component 3-in-1 polyurethane primer-enamel: hydroxyl-containing acrylic resin and aliphatic isocyanate; corrosion inhibitors, metallic titanium particles |
| Colour | gloss; base colours RAL 7045, 9003, 9005 |
| Packaging | 20 kg |
| Application method | brush, roller, spray gun, airless spray; preparation Sa 2½ or St3 (St2 permitted with removal of flaking coatings); thinners R-Universal, xylene, solvent, butyl acetate |
| Application temperature | not below +5 °C; relative humidity max. 80 % |
| Drying | pot life of the mix at least 2 h; to degree 3 max. 6 h at (20±2) °C; second coat — not earlier than 1 h |
| Key properties | Service temperature: from −50 to +90 °C, Non-volatile matter by weight (component A): 62–70 %, Adhesion: max. 1 point, Impact strength (U-2M): at least 50 cm, Gloss at 60°: 60–100 units, Resistance (static, 20 °C): water, petrol, hypochlorite solution — at least 72 h; 98 % sulphuric acid — at least 1 h |
| Compatible materials | over the Tsinkonol 2SH, Tsinkonol, Fosfogrunt-2PU, Fosfogrunt-1PU, Fosfogrunt-2EP or Epogrunt primers; may be applied without a primer |
| Shelf life | 12 months from the date of manufacture; storage from −40 to +40 °C |
| Standards | TU 20.30.12-014-01524656-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KRASKO
KRASKO
Polimerstoun-1 S80 — gloss polyurethane enamel for heavy-duty floors
One-component gloss polyurethane enamel for concrete floors under intensive, impact and deformation loads; adhesion from 2.5 MPa.
Price on request
KRASKO
Germoteks — polyurethane sealant for concrete floor joints
Elastic two-component polyurethane sealant for movement joints, cracks and junctions in floors; elongation at break 75 %.
Price on request
KRASKO
Teksil — fast-drying paint for concrete floors
Matt PVC-resin paint for industrial concrete floors, unheated premises and outdoor areas; can be applied at temperatures down to −20 °C.
Price on request
KRASKO
Tistrom-2MS — two-component polyurethane floor varnish
Gloss two-component polyurethane varnish for concrete and extra protection of polymer floors; walkable after 1.5–2 h.
Price on request
KRASKO
Akvastoun — waterborne strengthening impregnation for concrete
Deep-penetrating water-lithium dustproofing impregnation for new, old and freshly laid concrete.
Price on request