REKS® OL — lightweight thixotropic R3 mortar for repairing soffits
Non-shrink lightweight cementitious R3 mortar for overhead surfaces and extensive concrete damage; density of the hardened mortar 1.5 t/m³.

The ready-to-use dry mix REKS® Torkret is intended for the dry shotcreting method: it is used to line mine workings, stabilise rock bases and embankments, and quickly restore concrete surfaces in large volumes. The mix is also suitable for repairing reinforced concrete, brick and stone structures exposed to aggressive media in tunnels and industrial buildings. Compressive strength is at least 20 MPa after one day and 45 MPa after 28 days, freeze-thaw resistance F2 300, water impermeability W14; packed in 25 and 40 kg bags.
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | sprayed concrete mixes |
| Use | tunnels and metro, industrial buildings |
| Base | ready-to-use dry mix for the dry shotcreting method |
| Colour | grey |
| Packaging | bags 25 and 40 kg, MKR big bags |
| Application method | shotcreting of the lining structures of mine workings; rapid restoration of concrete surfaces in large volumes; application to rock bases and embankments for their stabilisation; repair of damaged surfaces of reinforced concrete, brick and stone structures exposed to aggressive media |
| Application temperature | +5…+30 °C |
| Curing | protection from precipitation for at least 24 h; in hot and windy weather — water spraying and covering with film |
| Key properties | freeze-thaw resistance: F2 300; water impermeability: W14; compressive strength at 28 days: ≥45 MPa; flexural strength at 1 day: ≥5 MPa; flexural strength at 28 days: ≥8 MPa; aggregate size: 2.5 mm; compressive strength at 1 day: ≥20 MPa |
| Shelf life | 9 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink lightweight cementitious R3 mortar for overhead surfaces and extensive concrete damage; density of the hardened mortar 1.5 t/m³.
Rapid-hardening fibre-reinforced flowable R4 mortar for roads, airfields, beams and slabs, machine bases and anchor fixing; compression from 65 MPa.
High-strength three-component epoxy grout for bridge bearings, equipment and rails; 80 MPa after just one day in flowable consistency.
Non-shrink fibre-reinforced class R3 mortar for repairing concrete and reinforced concrete by wet spraying, including in large volumes; from 35 MPa.
Fibre-reinforced flowable mix for grouting under bridge bearings and equipment foundations and repairing roads and airfields; 50 MPa after one day.
Fibre-reinforced non-shrink mortar for repair, finishing and local levelling of concrete, including floors; flowability is retained from 60 minutes.