Pakol
Pakol Litevoy BM — fine-grained flowable B40 mix for the cold season
Rapid-hardening fine-grained B40 flowable mortar for autumn and spring repair of floors and equipment foundations at −10…+7 °C; 10.0 MPa after 2 h.
Price on request
Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
The finishing material of the repair range is a finely dispersed skim-coat mix on a cement binder with 0.4 mm aggregate. It is used to level vertical and overhead surfaces of concrete, brick and stone and to fill small spalls, gouges and delaminations in industrial buildings, on columns and beams. To GOST 31357-2007 the mix corresponds to grade M500, Btb6.0, W14 and F1 300, class R4; bond strength to substrate is 2.8 MPa, and 2 days of moist curing are required after application.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Dry construction mix, finely dispersed, skim-coat type, levelling, on a cement binder |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For finish repair and levelling of vertical and overhead surfaces of concrete, brick and stone structures with damage (spalls, gouges, delaminations) from 1 to 5 mm deep |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 0.4; mixing water, l per 1 kg: 0.2…0.22; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.8; strength after 24 h: flexural 4.0 / compressive 18.0 MPa; strength after 28 days: flexural 8.0 (Btb6.0) / compressive 50.0 (M500) MPa; modulus of elasticity, GPa: 20.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W14 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+40 °C, humidity no more than 70 % |
| Standards | Pk2, M500, Btb6.0, W14, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Litevoy 600 M — fine-grained structural flowable R4 mix, B50
Class R4 flowable mortar with 1.0 mm aggregate for structural repair of small spalls and cavities in industrial buildings and on airfields; W16, F1 600.
Price on request
Pakol
Pakol Epoks T — thixotropic epoxy compound for repair and levelling
Thixotropic epoxy mortar for filling spalls and gouges with a chemically resistant coating on concrete, stone and brick; 95.0 MPa compressive at 7 days.
Price on request
Pakol
Pakol Remontny BM — fine-grained thixotropic mortar with rapid strength gain
Fine-grained rapid-hardening thixotropic mix for urgent filling of shallow spalls at −10…+7 °C; 10.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Remontny BK — rapid-hardening thixotropic mortar for work at −10…+7 °C
Rapid-hardening thixotropic mix for urgent repair of walls, ceilings and columns at −10…+7 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Remontny 600 M — fine-grained thixotropic R4 mix for walls and ceilings
Fine-grained thixotropic R4 mortar for structural repair of shallow spalls on bridges, in tunnels and on columns; watertightness W18.
Price on request