Pakol
Pakol Remontny BM — fine-grained thixotropic mortar with rapid strength gain
Fine-grained rapid-hardening thixotropic mix for urgent filling of shallow spalls at −10…+7 °C; 10.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Mikrolitevoy — finely dispersed flowable R4 mix for thin-layer repair
This finely dispersed non-shrink mix with aggregate of only 0.2 mm and Rk7 workability was created for thin-layer structural repair of concrete and reinforced concrete. It eliminates local spalls, gouges, cavities and delaminations on floors, road and airfield pavements, bridges and equipment foundations. Class R4, 28.0 MPa after 24 h, 60.0 MPa in compression after 28 days (B50), F1 400; 2 days of moist curing are required after placing.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | flowable repair mortars |
| Use | floors, roads and airfields, bridges and overpasses, equipment foundations |
| Base | Dry construction mix, finely dispersed, non-shrink, flowable type, on a cement binder |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For thin-layer structural repair of concrete and reinforced concrete structures by eliminating local damage (spalls, gouges, cavities, delaminations, etc.) up to 3 mm deep on horizontal and inclined (not more than 10°) surfaces |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 0.2; mixing water, l per 1 kg: 0.22…0.26; workability: (Rk7) over 30; bond strength to substrate, MPa: 2.5; shrinkage strain: 1.0 (0.10); strength after 24 h: flexural 5.0 / compressive 28.0 MPa; strength after 28 days: flexural 7.0 (Btb5.2) / compressive 60.0 (B50) MPa; modulus of elasticity, GPa: 18.0; sulphate resistance group: III; frost resistance: F1 400, F2 150; watertightness: W16 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+50 °C, humidity no more than 70 % |
| Standards | Rk7, B50, Btb5.2, W16, F1 400 to GOST 31358-2019 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-008-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny 400 K — non-structural thixotropic R3 mortar with 3 mm aggregate
Non-structural filling of large spalls and gouges on walls, columns and beams of industrial buildings: a thixotropic R3 mix with 3 mm aggregate.
Price on request
Pakol
Pakol Inektsionny B (rapid-hardening microcement) — crack injection down to −15 °C
Rapid-hardening microcement for injecting through and internal cracks, caverns and separations in concrete and masonry; work down to −15 °C without heating.
Price on request
Pakol
Pakol Litevoy Zima 600 M — winter flowable mix with fine aggregate, to −20 °C
Fine grain and work without heating down to −20 °C: a mix for urgent filling of shallow spalls in road and airfield pavements; 15.0 MPa after just 2 h.
Price on request
Pakol
Pakol Torkret — fibre-reinforced R3 mix for shotcreting
Fibre-reinforced thixotropic mix for shotcreting concrete, brick and stone walls and ceilings on bridges and in tunnels; class R3, W12.
Price on request
Pakol
Pakol Litevoy BK — rapid-hardening flowable mix for the off-season, −10…+7 °C
Off-season flowable mortar for autumn and spring: placing at −10…+7 °C, 15.0 MPa after 2 h, class B50 — for floors, roads and airfields.
Price on request