Pakol
Pakol Remontny Zima 600 K — coarse-grained winter R4 mortar, 20.0 MPa in 2 h
Winter B45 mix for urgent filling of spalls and cavities on walls and ceilings of dams and tanks without heating down to −20 °C; 20.0 MPa after 2 h.
Price on request
Pakol
Pakol Remontny Zima 400 K — antifreeze R3 mortar for non-structural repair
The mix with an antifreeze admixture is designed for non-structural repair at low positive and negative temperatures — down to −10 °C without heating. It is coarse-grained (aggregate up to 3 mm), thixotropic, non-shrink, with polymer fibre; it is applied to vertical, inclined and overhead surfaces with spalls and gouges in industrial buildings, on columns and beams. Class R3, B30, after 28 days 40.0 MPa in compression, W14, F1 300.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Dry construction mix with polymer fibre and an antifreeze admixture, coarse-grained, non-shrink, thixotropic type, on a cement binder, with a maximum grain size of 3 mm |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For non-structural repair of overhead, inclined and vertical surfaces with local damage (spalls, gouges, etc.) up to 60 mm deep at low positive and negative (down to -10 °C) air temperatures |
| Application temperature | down to −10 °C without heating |
| Key properties | aggregate size, mm: 3; mixing water, l per 1 kg: 0.14…0.16; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.0; strength after 24 h: flexural 4.0 / compressive 20.0 MPa; strength after 28 days: flexural 7.0 (Btb5.2) / compressive 40.0 (B30) MPa; modulus of elasticity, GPa: 18.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W14 |
| Shelf life | 12 months from the date of manufacture |
| Standards | Pk2, B30, Btb5.2, W14, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R3); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Inektsionny V (high-strength microcement) — class B65 injection grout
High-strength microcement for injection strengthening of foundations, consolidation of structures and soil stabilisation; 85.0 MPa compressive at W/S 0.3.
Price on request
Pakol
Pakol Litevoy 400 M — fine-grained flowable R3 mix for shallow spalls
Fine-grained flowable class R3 mix for non-structural repair of shallow spalls in floors, roads and foundations; aggregate size 1.0 mm.
Price on request
Pakol
Pakol Litevoy Zima 600 K — coarse-grained winter flowable mix to −20 °C, no heating
Coarse-grained winter B50 flowable mortar for deep gouges on bridges and equipment foundations, without heating down to −20 °C; 20.0 MPa after 2 h.
Price on request
Pakol
Pakol Remontny 600 M — fine-grained thixotropic R4 mix for walls and ceilings
Fine-grained thixotropic R4 mortar for structural repair of shallow spalls on bridges, in tunnels and on columns; watertightness W18.
Price on request
Pakol
Pakol Remontny 400 M — fine-grained thixotropic R3 mix for small spalls
R3 mortar with grain up to 1 mm for non-structural repair of small defects in columns, beams and walls of industrial buildings at temperatures from +5 °C; B30.
Price on request