Pakol
Pakol Mikrolitevoy — finely dispersed flowable R4 mix for thin-layer repair
Finely dispersed flowable R4 mix for thin-layer structural repair of floors, roads and bridges; aggregate size 0.2 mm, compressive 60.0 MPa.
Price on request
Pakol
Pakol Remontny 400 M — fine-grained thixotropic R3 mix for small spalls
The fine-grained version of the non-structural repair mortar with a maximum grain size of 1 mm is designed for small spalls and gouges on walls and on inclined and overhead areas of columns, beams and industrial buildings. The mix is thixotropic, non-shrink, with polymer fibre; mixing water is 0.15…0.17 l per 1 kg. Class R3 and B30: 18.0 MPa after 24 h, 40.0 MPa in compression after 28 days, bond to substrate 2.0 MPa, F1 300.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Dry construction mix with polymer fibre, fine-grained, non-shrink, thixotropic type, on a cement binder, with a maximum grain size of 1 mm |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For non-structural repair of overhead, inclined and vertical surfaces with local damage (spalls, gouges, etc.) up to 20 mm deep |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 1-2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 1.0; mixing water, l per 1 kg: 0.15…0.17; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170–190 mm; bond strength to substrate, MPa: 2.0; strength after 24 h: flexural 4.0 / compressive 18.0 MPa; strength after 28 days: flexural 7.0 (Btb5.2) / compressive 40.0 (B30) MPa; modulus of elasticity, GPa: 18.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W14 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+40 °C, humidity no more than 70 % |
| Standards | Pk2, B30, Btb5.2, W14, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R3); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny 800 K — high-strength thixotropic B60 mortar for strengthening
Thixotropic B60 mix with a modulus of elasticity of 27.0 GPa for strengthening reinforced concrete columns, beams and walls of buildings and bridges; flexural 12.0 MPa.
Price on request
Pakol
Pakol Remontny 600 KS — steel-fibre mortar for vibration-loaded structures
Mix with steel and polypropylene fibre for repair and strengthening of structures under dynamic and vibration loads; flexural strength 11.0 MPa (Btb8.0).
Price on request
Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
Finely dispersed cementitious skim coat for finish repair and levelling of concrete, brick and stone walls and ceilings; bond to substrate 2.8 MPa.
Price on request
Pakol
Pakol Epoks I — epoxy injection compound for cracks and voids
Low-viscosity epoxy resin for injecting cracks 0.1–0.8 mm wide through packers in columns, beams and floors; adhesion to concrete from 3.0 MPa.
Price on request
Pakol
Pakol Litevoy 600 M — fine-grained structural flowable R4 mix, B50
Class R4 flowable mortar with 1.0 mm aggregate for structural repair of small spalls and cavities in industrial buildings and on airfields; W16, F1 600.
Price on request