Pakol
Pakol Litevoy 600K FAST — flowable mix with ultra-rapid strength gain
Flowable mix for fast-track structural repair of floors, roads and bridges; 20.0 MPa compressive after 2 h, workability retained for 20–30 min.
Price on request
Pakol
Pakol Remontny 600 KS — steel-fibre mortar for vibration-loaded structures
This thixotropic mortar with steel and polypropylene fibre is intended for structural repair and strengthening of vertical, inclined and overhead concrete and reinforced concrete surfaces subject to dynamic and vibration loads. It is used on bridges and overpasses, in tunnels and metro, on dams, tanks, columns and beams; steel fibre is supplied in separate 0.5 kg packs. After 28 days the flexural strength is 11.0 MPa (Btb8.0), compressive 65.0 MPa (B50), W20, F1 1000.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, tanks and treatment plants, columns and beams |
| Base | Dry construction mix with steel and polypropylene fibre, coarse-grained, non-shrink, thixotropic type, on a cement binder |
| Packaging | 25 kg bags (three-ply with a polyethylene liner); steel fibre in separate 0.5 kg packs |
| Application method | For structural repair and strengthening of overhead, inclined and vertical surfaces of concrete and reinforced concrete substrates with damage (spalls, gouges, etc.) up to 60 mm deep, subject to dynamic and vibration loads |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 3.0; mixing water, l per 1 kg: 0.14…0.16; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.5; strength after 24 h: flexural 7.0 / compressive 30.0 MPa; strength after 28 days: flexural 11.0 (Btb8.0) / compressive 65.0 (B50) MPa; modulus of elasticity, GPa: 25.0; sulphate resistance group: III; contact zone frost resistance: Fkz 100; frost resistance: F1 1000, F2 300; watertightness: W20 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+40 °C, humidity no more than 70 % |
| Standards | Pk2, B50, Btb8.0, W20, F1 1000 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny 600 K — structural thixotropic R4 mortar for bridges and tunnels
Coarse-grained thixotropic R4 mortar for repair and strengthening of bridges, tunnels, dams and tanks; F1 1000, W20, compressive 65.0 MPa after 28 days.
Price on request
Pakol
Pakol Mikrotsement M (basic microcement) — for strengthening foundations and soils
Basic microcement grade with particles up to 0.1 mm: it is used to prepare an injection grout for bases, soils and internal damage in masonry and concrete.
Price on request
Pakol
Pakol Remontny BK — rapid-hardening thixotropic mortar for work at −10…+7 °C
Rapid-hardening thixotropic mix for urgent repair of walls, ceilings and columns at −10…+7 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Epoks I — epoxy injection compound for cracks and voids
Low-viscosity epoxy resin for injecting cracks 0.1–0.8 mm wide through packers in columns, beams and floors; adhesion to concrete from 3.0 MPa.
Price on request
Pakol
Pakol Remontny 600 KM — R4 mortar with admixtures that reduce cracking
Mix with an expansive admixture and modifiers that reduce cracking, for structural repair and strengthening of reinforced concrete; class R4, B50.
Price on request