Pakol
Pakol Remontny BK — rapid-hardening thixotropic mortar for work at −10…+7 °C
Rapid-hardening thixotropic mix for urgent repair of walls, ceilings and columns at −10…+7 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Remontny 600 K — structural thixotropic R4 mortar for bridges and tunnels
Bridges, overpasses, tunnels, dams, tanks and treatment plants are the main applications for this coarse-grained thixotropic class R4 mortar with polymer fibre. It is intended for structural repair and strengthening of vertical, inclined and overhead surfaces with spalls and gouges, including columns and beams. After 28 days: 65.0 MPa in compression (B50) and 9.0 MPa in flexure (Btb6.8), watertightness W20, frost resistance F1 1000, contact zone Fkz 100.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, tanks and treatment plants, columns and beams |
| Base | Dry construction mix with polymer fibre, coarse-grained, non-shrink, thixotropic type, on a cement binder, with a maximum grain size of 3 mm |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For structural repair and strengthening of overhead, inclined and vertical surfaces with local damage (spalls, gouges, etc.) up to 60 mm deep |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 3.0; mixing water, l per 1 kg: 0.14…0.16; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.5; strength after 24 h: flexural 6.0 / compressive 30.0 MPa; strength after 28 days: flexural 9.0 (Btb6.8) / compressive 65.0 (B50) MPa; modulus of elasticity, GPa: 25.0; sulphate resistance group: III; contact zone frost resistance: Fkz 100; frost resistance: F1 1000, F2 300; watertightness: W20 |
| Shelf life | 12 months from the date of manufacture; storage at -40…+50 °C, humidity no more than 70 % |
| Standards | Pk2, B50, Btb6.8, W20, F1 1000 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
Finely dispersed cementitious skim coat for finish repair and levelling of concrete, brick and stone walls and ceilings; bond to substrate 2.8 MPa.
Price on request
Pakol
Pakol Torkret S (sulphate-resistant) — R3 shotcrete mix with watertightness W20
Sulphate-resistant fibre-reinforced mix for shotcreting bridges, tunnels, tanks and treatment plants; watertightness W20.
Price on request
Pakol
Pakol Torkret — fibre-reinforced R3 mix for shotcreting
Fibre-reinforced thixotropic mix for shotcreting concrete, brick and stone walls and ceilings on bridges and in tunnels; class R3, W12.
Price on request
Pakol
Pakol Remontny Zima 600 M — fine-grained winter R4 mortar for work down to −20 °C
Fine-grained thixotropic mortar for urgent repair of spalls and cavities on walls, columns and ceilings in frost down to −20 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Litevoy Zima 800 K — self-levelling winter mix, B70
High-strength self-levelling B70 mix for winter repair of industrial floors and roads down to −20 °C; 55.0 MPa after just 24 h.
Price on request