Pakol
Pakol Remontny Zima 400 M — fine-grained antifreeze R3 mix, to −10 °C
Fine-grained R3 mix with an antifreeze admixture for filling small spalls on walls, columns and ceilings down to −10 °C without heating.
Price on request
Pakol
Pakol Litevoy Zima 800 K — self-levelling winter mix, B70
Class B70 and self-levelling ability set this winter flowable mix apart: after 24 h it reaches 55.0 MPa, after 28 days 80.0 MPa in compression and 10.0 MPa in flexure (Btb8.0). The coarse-grained mix with polymer fibre is placed without heating at sub-zero temperatures down to −20 °C on horizontal and slightly inclined surfaces. It is used for urgent restoration of spalls, gouges and delaminations of concrete and reinforced concrete in industrial buildings, on roads, airfields, bridges and equipment foundations; W20, F1 800.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | flowable repair mortars |
| Use | floors, roads and airfields, bridges and overpasses, industrial buildings, equipment foundations |
| Base | Dry construction mix, coarse-grained, with polymer fibre, non-shrink, self-levelling, flowable type, on a cement binder with ultra-rapid strength gain |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For urgent structural repair of concrete and reinforced concrete structures by eliminating local damage (spalls, gouges, cavities, delaminations, etc.) from 10 to 200 mm deep on horizontal and inclined (not more than 10°) surfaces at negative (down to -20 °C) and low positive ambient temperatures |
| Application temperature | down to −20 °C without heating |
| Key properties | aggregate size, mm: 3.0; mixing water, l per 1 kg: 0.12…0.15; workability: (Rk6) 26-30; bond strength to substrate, MPa: 2.5; strength after 2 h: flexural 3.0 / compressive 20.0 MPa; strength after 24 h: flexural 7.0 / compressive 55.0 MPa; strength after 28 days: flexural 10.0 (Btb8.0) / compressive 80.0 (B70) MPa; modulus of elasticity, GPa: 25.0; sulphate resistance group: III; frost resistance: F1 800, F2 300; watertightness: W20 |
| Shelf life | 12 months from the date of manufacture; storage at -40…+50 °C, humidity no more than 70 % |
| Standards | Rk6, B70, Btb8.0, W20, F1 800 to GOST 31358-2019 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-008-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Inektsionny V (high-strength microcement) — class B65 injection grout
High-strength microcement for injection strengthening of foundations, consolidation of structures and soil stabilisation; 85.0 MPa compressive at W/S 0.3.
Price on request
Pakol
Pakol Epoks I — epoxy injection compound for cracks and voids
Low-viscosity epoxy resin for injecting cracks 0.1–0.8 mm wide through packers in columns, beams and floors; adhesion to concrete from 3.0 MPa.
Price on request
Pakol
Pakol Remontny 600 M — fine-grained thixotropic R4 mix for walls and ceilings
Fine-grained thixotropic R4 mortar for structural repair of shallow spalls on bridges, in tunnels and on columns; watertightness W18.
Price on request
Pakol
Pakol Remontny Zima 400 K — antifreeze R3 mortar for non-structural repair
Coarse-grained R3 mix with an antifreeze admixture for non-structural repair of walls, columns and ceilings down to −10 °C without heating.
Price on request
Pakol
Pakol Litevoy 600K FAST — flowable mix with ultra-rapid strength gain
Flowable mix for fast-track structural repair of floors, roads and bridges; 20.0 MPa compressive after 2 h, workability retained for 20–30 min.
Price on request