Pakol
Pakol Remontny 600 KM — R4 mortar with admixtures that reduce cracking
Mix with an expansive admixture and modifiers that reduce cracking, for structural repair and strengthening of reinforced concrete; class R4, B50.
Price on request
Pakol
Pakol Epoks I — epoxy injection compound for cracks and voids
This two-component low-viscosity epoxy-based compound is injected through packers into internal cracks and voids to restore the monolithic integrity of concrete; it is also used to bond structural elements. The material is designed for cracks with an opening of 0.1–0.8 mm in columns, beams and floors of industrial buildings and is produced taking into account the requirements of GOST 33762-2016 (group AS). After 1 day the compressive strength is 65.0 MPa, adhesion to metal at 7 days is at least 10.0 MPa, and the pot life at +22 °C is 90–120 min.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | crack injection compounds |
| Use | columns and beams, industrial buildings, floors |
| Base | Two-component low-viscosity epoxy-based injection and sealing compound |
| Colour | transparent (after curing) |
| Packaging | component A (epoxy resin) 20 kg + component B (hardener) 8 kg, polyethylene containers; yield from a 28 kg kit — 25.5 l |
| Application method | Elimination of internal damage (cracks, voids) with an opening of 0.1–0.8 mm by injection through packers; restoration of monolithic integrity; bonding of elements |
| Application temperature | +10…+30 °C (optimum +15…+25 °C) |
| Key properties | density of the mixed compound: 1.10±0.05 g/cm³; pot life at +30 / +22 / +10 °C: 50–60 / 90–120 / 120–150 min; strength after 1 day: flexural 25.0 / compressive 65.0 MPa; after 7 days: flexural 35.0 / compressive 75.0 MPa; adhesion to concrete at 7 days: ≥3.0 MPa; to metal at 7 days: ≥10.0 MPa; autogenous shrinkage at 1 day: ≤0.2 mm/m; abrasion: ≤0.1 g/cm²; modulus of elasticity at 7 days: ≥15,000 MPa; frost resistance: F2 200 |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 23.99.19-007-76310469-2022 (taking into account the requirements of GOST 33762-2016, group AS) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Litevoy Zima 800 K — self-levelling winter mix, B70
High-strength self-levelling B70 mix for winter repair of industrial floors and roads down to −20 °C; 55.0 MPa after just 24 h.
Price on request
Pakol
Pakol Remontny BK — rapid-hardening thixotropic mortar for work at −10…+7 °C
Rapid-hardening thixotropic mix for urgent repair of walls, ceilings and columns at −10…+7 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Epoks T — thixotropic epoxy compound for repair and levelling
Thixotropic epoxy mortar for filling spalls and gouges with a chemically resistant coating on concrete, stone and brick; 95.0 MPa compressive at 7 days.
Price on request
Pakol
Pakol Litevoy 400 K — coarse-grained flowable R3 mortar for deep gouges
Coarse-grained flowable class R3 mix for non-structural repair of deep gouges on floors, roads and bridges; 40.0 MPa compressive after 28 days.
Price on request
Pakol
Pakol Torkret — fibre-reinforced R3 mix for shotcreting
Fibre-reinforced thixotropic mix for shotcreting concrete, brick and stone walls and ceilings on bridges and in tunnels; class R3, W12.
Price on request