Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
Finely dispersed cementitious skim coat for finish repair and levelling of concrete, brick and stone walls and ceilings; bond to substrate 2.8 MPa.
Price on request
Pakol
Pakol Remontny Zima 600 M — fine-grained winter R4 mortar for work down to −20 °C
This fine-grained thixotropic mortar with polymer fibre and 1.0 mm aggregate works down to −20 °C without heating: it is used for urgent structural repair of shallow spalls, gouges and cavities on vertical, inclined and overhead surfaces. Typical sites are bridges and overpasses, tunnels and metro, dams, tanks and treatment plants, columns and beams. After 2 h the mortar reaches 12.0 MPa in compression, after 28 days 60.0 MPa (B45); class R4, W18, F1 600.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, tanks and treatment plants, columns and beams |
| Base | Dry construction mix, fine-grained, with polymer fibre, non-shrink, thixotropic type, on a cement binder with ultra-rapid strength gain |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For urgent structural repair of concrete and reinforced concrete structures by eliminating local damage (spalls, gouges, cavities, etc.) up to 20 mm deep on vertical, inclined and overhead surfaces at negative (down to -20 °C) and low positive ambient temperatures |
| Application temperature | down to −20 °C without heating |
| Key properties | aggregate size, mm: 1.0; mixing water, l per 1 kg: 0.15…0.17; workability retention, min: 10; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.5; strength after 2 h: flexural 3.0 / compressive 12.0 MPa; after 4 h: flexural 3.5 / compressive 15.0 MPa; strength after 24 h: flexural 6.0 / compressive 25.0 MPa; strength after 28 days: flexural 8.0 (Btb6.0) / compressive 60.0 (B45) MPa; modulus of elasticity, GPa: 25.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 600, F2 200; watertightness: W18 |
| Shelf life | 12 months from the date of manufacture; storage at -40…+50 °C, humidity no more than 70 % |
| Standards | Pk2, B45, Btb6.0, W18, F1 600 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Torkret — fibre-reinforced R3 mix for shotcreting
Fibre-reinforced thixotropic mix for shotcreting concrete, brick and stone walls and ceilings on bridges and in tunnels; class R3, W12.
Price on request
Pakol
Pakol Anker — B70 non-shrink grout for installing machine tools
High-strength flowable mix for grouting machine tools and equipment, installing anchors and filling joints in reinforced concrete; 80.0 MPa compressive after 28 days.
Price on request
Pakol
Pakol Remontny 400 K — non-structural thixotropic R3 mortar with 3 mm aggregate
Non-structural filling of large spalls and gouges on walls, columns and beams of industrial buildings: a thixotropic R3 mix with 3 mm aggregate.
Price on request
Pakol
Pakol Litevoy Zima 800 K — self-levelling winter mix, B70
High-strength self-levelling B70 mix for winter repair of industrial floors and roads down to −20 °C; 55.0 MPa after just 24 h.
Price on request
Pakol
Pakol Remontny 600 M — fine-grained thixotropic R4 mix for walls and ceilings
Fine-grained thixotropic R4 mortar for structural repair of shallow spalls on bridges, in tunnels and on columns; watertightness W18.
Price on request