Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Profskrin RC40 Sm — fibre-reinforced finishing mortar, 40 MPa at 28 days
INDASTRO

Profskrin RC40 Sm — fibre-reinforced finishing mortar, 40 MPa at 28 days

Thixotropic repair mortars

The finishing mortar Profskrin RC40 Sm, based on Portland cement, sand up to 0.63 mm and fibre, reaches at least 20 MPa in compression after 24 hours, 30 MPa after 7 days and 40 MPa after 28 days, with flexural strength from 6 MPa. It is used for structural repair of load-bearing building and bridge structures, treatment and industrial facilities, underground ducts and pipelines. The mix retains workability for 60 minutes, bond to the substrate is from 1.5 MPa, frost resistance at least 300 cycles.

Specifications

ManufacturerINDASTRO — OOO Sedrus
Typethixotropic repair mortars
Usebridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams
BasePortland cement, graded sand with particle size up to 0.63 mm, fibre, modifying admixtures
Packagingbags 25 kg
Application methodProfskrin RC40 Sm finishing repair mortar is used for structural repair of concrete structures: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures
Application temperature+5…+30 °C
Key propertiesmixing water: 0.16-0.17; compressive strength at 24 h: ≥20 MPa; compressive strength at 7 days: ≥30 MPa; compressive strength at 28 days: ≥40 MPa; flexural strength at 28 days: ≥6 MPa; bond strength to substrate: ≥1.5 MPa; workability retention: 60 min; frost resistance: ≥300 cycles; maximum aggregate size, mm: 0.63
Shelf life12 months in the original factory packaging from the date of manufacture, in a dry room

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by INDASTRO