BIRSS
BIRSS 59 S1 M1000 — non-shrink self-compacting concrete mix for grouting
Concrete mix with quartz and granite aggregates for grouting and anchoring equipment, repairing columns and joints; 100 MPa at 28 days.
Price on request
BIRSS
BIRSS RSM-2M M350 — rapid-hardening fibre-reinforced repair mix
Structural repair of concrete and reinforced concrete is the main task of BIRSS RSM-2M M350, a rapid-hardening thixotropic mix with reinforcing fibre and sand up to 1.25 mm. It is used to restore elements of road bridges and tunnels and structures under dynamic loads, and to fill joints between precast elements, potholes and cavities without formwork. After one day the mortar reaches at least 15 MPa in compression, at 28 days 35 MPa; water impermeability W12, frost resistance F2 400, produced to STO 05668056-004-2012.
Specifications
| Manufacturer | BIRSS — AO Opytny Zavod Sukhikh Smesey (Experimental Dry Mix Plant), Moscow |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, columns and beams, industrial buildings |
| Base | BIRSS RSM-2M M350 dry repair mix is a material based on special cements, graded fine sand, reinforcing fibre and chemical admixtures which, when mixed with water, give a rheoplastic, non-segregating, rapid-hardening thixotropic… |
| Colour | grey |
| Packaging | bags 25 / 40 kg |
| Application method | BIRSS RSM-2M M350 repair mix is recommended for structural repair of concrete and reinforced concrete structures where high compressive strength is required: elements of road bridges and tunnels; structural elements subject to dynamic loads; filling vertical and horizontal joints between precast elements; potholes and cavities without formwork in areas with increased surface quality requirements; those in… |
| Application temperature | +5…+35 °C |
| Key properties | maximum aggregate size, mm: 1.25; workability grade: Pk2/4-8; workability retention, min: 40; bond strength to substrate, MPa: 2; compressive strength, MPa, not less than - 1 day 15 - 28 days 35; flexural strength, MPa, not less than -1 day 3 - 28 days 7; water impermeability: W12; frost resistance: F2 400; sulphate resistance coefficient: 0.9; service temperature, °C: from -50 to +70 |
| Standards | STO 05668056-004-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS Riberpol — resilient polyurethane self-levelling floor
Resilient polyurethane floor for crack-prone concrete substrates and mastic asphalt; remains elastic down to −20 °C.
Price on request
BIRSS
BIRSS Polilak — gloss polyurethane floor sealer
Clear gloss polyurethane sealer: a finish for Izipol and Riberpol self-levelling floors and a protective impregnation for concrete floors.
Price on request
BIRSS
BIRSS Kharts — epoxy primer for polymer floors
Unpigmented epoxy primer for epoxy and polyurethane floors and binder for repair compounds; bond to concrete from 3.5 MPa.
Price on request
BIRSS
BIRSS RSM-2M M550 Moroz — R4 repair mix with anti-freeze admixture
Mix for hand repair of joints, cracks and concrete defects without formwork at low and sub-zero temperatures; at +20 °C it reaches 55 MPa in 28 days.
Price on request
BIRSS
BIRSS UK-1 hardener — quartz topping for concrete floors
Dry quartz-filled hardening mix for medium-duty floors in production halls, warehouses and car parks; compressive strength from 60.0 MPa.
Price on request