BIRSS
BIRSS RSM-2M M350 Mekh — fibre-reinforced R3 shotcrete mix for bridges and tunnels
Fibre-reinforced shotcrete mix for repairing bridges, tunnels, hydraulic structures, columns and beams; class R3, F2 400.
Price on request
BIRSS
BIRSS VRS 600 — R4 repair mix for high-strength concrete structures
Structures made of high-strength concrete are the speciality of BIRSS VRS 600: the thixotropic mix with fibre and compensated shrinkage restores their vertical and horizontal surfaces, corners of columns and beams and balcony edges destroyed by reinforcement corrosion, and fills non-moving working joints. It is not recommended as a pourable mortar. Class R4; compressive strength 25 MPa after one day and 60 MPa at 28 days, W18, F2 400, service temperature from −50 to +300 °C.
Specifications
| Manufacturer | BIRSS — AO Opytny Zavod Sukhikh Smesey (Experimental Dry Mix Plant), Moscow |
|---|---|
| Type | thixotropic repair mortars |
| Use | columns and beams, industrial buildings |
| Base | BIRSS VRS M600 is a material based on special cements, graded sand, fibre and chemical admixtures. When mixed with water it gives a rheoplastic, non-segregating, rapid-hardening thixotropic mortar with compensated shrinkage. The mortar is plastic, … |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | BIRSS VRS M600 dry mix is intended for: repairing vertical and horizontal surfaces of reinforced concrete structures made of high-strength concrete; restoring damaged concrete surfaces, corners of columns and beams and balcony edges destroyed by reinforcement corrosion; eliminating surface defects in concrete; filling non-moving (working) joints in concrete. Not recommended for use as a pourable mortar. PACKAGING Paper bag—25 kg From the date of issue of this technical description all… |
| Application temperature | +5…+50 °C |
| Key properties | maximum aggregate size, mm: 0.63/1.25; workability grade: Pk2/4-8; workability retention, min: 30; bond strength to substrate, MPa: 2; compressive strength, MPa, not less than - 1 / 3 / 7 / 28 days 25 / 35 / 50 / 60; flexural strength, MPa, not less than - 1 / 28 days 3.5 / 10; water impermeability: W18; frost resistance: F2 400; frost resistance of the contact zone: Fkz100; sulphate resistance coefficient: 0.9; service temperature, °C: from -50 to +300 |
| Standards | class R4 to GOST R 56378; STO 05668056-004-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS 59 S2 M700 Moroz — 70 MPa R4 mix placed from −15 to +30 °C
Thixotropic mortar with microfibre for repairing bridges, tunnels and port structures from −15 to +30 °C; at +20 °C it reaches 70 MPa in 28 days.
Price on request
BIRSS
BIRSS RSM-2M M550 Moroz — R4 repair mix with anti-freeze admixture
Mix for hand repair of joints, cracks and concrete defects without formwork at low and sub-zero temperatures; at +20 °C it reaches 55 MPa in 28 days.
Price on request
BIRSS
BIRSS 59 S2 M600 Moroz Uskorennaya — R4 mix gaining 20 MPa in 2 hours at +20 °C
Accelerated-hardening thixotropic mortar for repairing bridges, tunnels and joints at temperatures from −10 °C; 20 MPa after 2 hours at +20 °C.
Price on request
BIRSS
BIRSS RBM M400 — fibre-reinforced R3 mix for airfield and road pavements
Thixotropic repair mortar with fibre for airfield and road pavements under intensive dynamic and impact loads; class R3.
Price on request
BIRSS
BIRSS RBG M500 — two-component R4 repair mix with granite aggregate
Kit of dry mix and granite aggregate for repairing ramps, bridge abutments, channels, floors and slab joints; modulus of elasticity 25,000 MPa.
Price on request