VINIKOR-marin AF — tin-free antifouling enamel for ships and fixed structures
Antifouling enamel without organotin compounds for low- and medium-speed ships and fixed structures; applied from −5 °C.

PLAMCOR-2 is a solvent-borne intumescent paint based on acrylic copolymers; it is supplied in a single pack and requires no mixing of components. It is intended for steel structures in heated and unheated premises and under a canopy (placement categories 2, 3, 4 per GOST 15150). The coating is not water-resistant: outdoors it may be left only for the construction period, for no more than two years and under a finish enamel. It is applied at temperatures from −25 to +40 °C, including at sub-zero temperatures.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Application | steel structures |
| Service conditions | placement categories 2, 3, 4 per GOST 15150 (under a canopy, in unheated and heated premises); outdoors — only for the construction period, no more than 2 years, when overcoated with a finish enamel; the coating is not water-resistant |
| Base | acrylic copolymers, solvent-borne, one-pack, intumescent |
| Colour | white to light grey (shade not standardised) |
| Packaging | tin buckets |
| Application method | airless spray (nozzle 0.019–0.031″, ≥20 MPa), brush |
| Application temperature | from −25 to +40 °C, relative humidity ≤ 80 % |
| Drying | to degree 3 — no more than 3 h at 20 °C; before overcoating with enamel — at least 24 h; full drying — at least 10 days at 20 °C |
| Compatible primers and topcoats | enamels POLITON-UR (UV), EVOPOL-12, PF-115, etc. (polyurethane, vinyl-epoxy, vinyl, chlorinated vinyl, alkyd); primers TSINEP, IZOLEP-primer, IZOLEP-mastic, IZOLEP, VINIKOR-061, VINIKOR-ecoprime-01, EVOPOL-12, GF-021 |
| Shelf life | 24 months |
| Standards | TU 2313-074-12288779-2008; GOST 15150; GOST 9980.5; GOST 19007; EAEU certificates of conformity (incl. EAEU KZ) and NSOPB certificates |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Antifouling enamel without organotin compounds for low- and medium-speed ships and fixed structures; applied from −5 °C.
The finish coat of the IZOLEP-WP waterproofing system for bridge superstructure slabs: a polyurethane enamel resistant to weathering and ultraviolet.
Epoxy primer-enamel for steel structures: a primer under POLITON-UR (UV) and PLAMCOR fire protection, overcoatable after just 3 h at +20 °C.
Highly filled epoxy enamel for nuclear facilities, bridge trusses and steel structures; radiation resistance of at least 1 MGy.
Colourless vinyl varnish for priming the concrete of bridges and industrial structures under VINIKOR-62 enamel; overcoating after 2 h.
Self-polishing antifouling enamel for ships with an unrestricted navigation area and fixed structures in zones of high fouling activity.