OGNEZA-PM-K cable penetration
Split steel cable penetration with an intumescent insert for single cables and bundles through walls and floors; IET 180.

OGNEZA-VD-M is a water-dispersion intumescent paint for steel structures made by the OGNEZA plant in St Petersburg. Certified ratings are 15, 30, 45, 60 and 90 minutes, i.e. fire protection performance groups 7 to 3 per GOST R 53295. The coating is intended for indoor use: structures must not be exposed to precipitation or be in contact with the ground. The paint is applied over GF-021 primer by spray gun, brush or roller at temperatures from +5 °C; the base colour is white, and tinting to pastel shades is possible.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | 15, 30, 45, 60 and 90 minutes (fire protection performance groups 7–3 per GOST R 53295) |
| Application | steel structures |
| Service conditions | indoors; for structures not exposed to precipitation and not in contact with the ground; service temperature from −40 to +50 °C |
| Base | water-dispersion intumescent |
| Colour | white (tinting to pastel shades) |
| Packaging | 25 kg |
| Application method | air spray gun, brush, roller; thinning with water ≤ 5 % |
| Application temperature | from +5 to +40 °C, relative humidity 80 % |
| Drying | between coats 4–8 h at 20 °C; up to 24 h; coating formation — 7 days |
| Compatible primers and topcoats | GF-021 primer (GOST 25129) |
| Shelf life | 18 months |
| Standards | TU 20.30.11-021-92450604-2018; GOST R 53295; certificates under TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Split steel cable penetration with an intumescent insert for single cables and bundles through walls and floors; IET 180.
Split steel collar with an intumescent insert for plastic pipes in walls and floors; EI 180, up to EI 240 according to the manufacturer.
Dry concentrate of fire-retardant impregnation for timber, diluted with water 1:3; groups I and II per GOST R 53292, 25 kg bags.
Water-soluble fire and bio-protective impregnation for timber indoors and outdoors without direct precipitation; groups I and II per GOST R 53292.
Dry concentrate of fire-retardant impregnation for fabrics and carpets: the solution makes the material hard-to-ignite per GOST R 50810-95.
Acrylic fire-retardant varnish for timber, concrete, brick and plaster indoors and outdoors; class KM2 (G1, D2, T2), clear or tinted.