OGRAX-SKE epoxy fire protection coating
Two-component epoxy fire protection coating for steel in aggressive environments and marine climates, R45–R120, hydrocarbon fire.

Unlike OGRAX-V1, OGRAX-VV is moisture-resistant: it is used in premises and cable structures with humidity up to 100% and outdoors, from −50 to +60 °C. It protects category A and B cables laid singly and in bundles. The base is a water-polymer dispersion with mineral and organic fillers; the colour is grey. Compliance with GOST R 53311-2009 is confirmed by a TR EAEU 043/2017 certificate; the service life of the coating is 40 years. The same compound is used in OGRAX-KP cable penetration seals.
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | complies with GOST R 53311-2009 (TR EAEU 043/2017 certificate) |
| Application | cable lines |
| Service conditions | premises and cable structures with humidity up to 100% and outdoors, from −50 to +60 °C; category A and B cables, single and in bundles |
| Base | water-polymer dispersion with mineral and organic fillers, moisture-resistant |
| Colour | grey |
| Packaging | metal containers with tight-fitting lids |
| Application method | airless spray in layers, roller, brush |
| Application temperature | not below +5 °C, RH ≤ 85% |
| Drying | between coats 6–10 h, full 10–15 days |
| Shelf life | 1 year; freezing not permitted |
| Standards | TU 5728-026-13267785-03; GOST R 53311-2009; TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component epoxy fire protection coating for steel in aggressive environments and marine climates, R45–R120, hydrocarbon fire.
Weather-resistant two-layer fire protection for steel, R90–R120: OGRAX-T thermal fire-insulating layer and OGRAX-MSK intumescent paint.
Extruded tape of oxidised graphite and PVC with an adhesive transfer layer; 90 minutes of protection against the passage of gases, flame and smoke.
Flexible tape of oxidised graphite and rubber, including a self-adhesive version, for gaps in doors, hatches, dampers and flanges; up to 150 minutes.
Two-component coating on a hybrid binder for fire protection of class A and H bulkheads and decks on ships and offshore platforms.
Split steel collars with an intumescent insert for plastic sewer and water supply pipes; EI 180, diameters 16–110.