SPLEND-30 fire protection system for air ducts
EI30 fire protection system for air ducts: NATRSIL-S 541 adhesive compound and Folma-Kholst KhF foil-faced thermal insulation fabric.
Timber structures indoors and under a canopy are protected by VUP-2D, a water-based paint on polyvinyl acetate dispersion that provides fire protection performance group 1 to GOST R 53292. It is applied in one or two coats by spray, brush or roller at temperatures from +5 °C, with intercoat drying of 4 hours. For outdoor use, after 48 hours the coating is overcoated with a weather-resistant enamel. The white colour can be tinted in pastel shades; the shelf life of the paint is 6 months.
| Manufacturer | NEOFLAME (Teplokhim) — OOO NPP TEPLOKHIM, Dmitrov |
|---|---|
| Fire protection performance | fire protection performance group 1 (GOST R 53292) |
| Application | timber |
| Service conditions | indoors and under a canopy; humidity not above 85 %, from −60 °C to +60 °C; outdoors, with a weather-resistant enamel |
| Base | aqueous polyvinyl acetate dispersion, fire retardants, fillers |
| Colour | white, tinting in pastel shades permitted |
| Packaging | polyethylene drum, 50 kg |
| Application method | air or airless spray, brush, roller |
| Application temperature | not below +5 °C; humidity not above 80 % |
| Drying | intercoat 4 h at +20 °C; protective enamel after 48 h |
| Compatible primers and topcoats | for outdoors, a weather-resistant enamel |
| Shelf life | 6 months in factory packaging; storage not below +1 °C |
| Standards | TU 2316-004-66828143-2016; GOST R 53292 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
EI30 fire protection system for air ducts: NATRSIL-S 541 adhesive compound and Folma-Kholst KhF foil-faced thermal insulation fabric.
Water-based fire protection paint for steel structures up to R90, also used on reinforced concrete products and composites; 50 kg drum.
Thick-film sprayable compound with ablative fillers for structural fire protection of steel up to R150, application from −10 °C.
Water-emulsion intumescent paste for fire protection of steel structures inside buildings, up to R45; kit of paste and ammophos.
Two-component thick-film silane-based fire protection compound for steel and concrete in open industrial atmosphere up to C5-I/C5M.
Two-component water-resistant compound for fire protection of cables in tunnels and flood-prone zones, withstands precipitation an hour after application.