Instead of concrete encasement or plastering on mesh, steel structures in enclosed premises can be coated with VPM-2 paste. The material has two components: a thick-ground paste on a water binder with three types of fillers (gas-forming, heat-resistant and fibrous) and granulated ammophos; the prepared working mix is used within one day. Fire protection performance is up to R45 at humidity not above 80 %, temperatures up to +35 °C and in the absence of aggressive vapours and gases. It is applied mechanically or with a trowel at +10…+35 °C; the kit consists of three 47 kg drums of paste and a 50 kg bag of ammophos.
| Manufacturer | NEOFLAME (Teplokhim) — OOO NPP TEPLOKHIM, Dmitrov |
|---|---|
| Fire protection performance | up to R45 |
| Application | steel structures |
| Service conditions | only inside enclosed premises, humidity no more than 80 %, without aggressive vapours and gases, temperature no more than +35 °C |
| Base | two components: thick-ground mixture of gas-forming, heat-resistant and fibrous fillers in a water binder + granulated ammophos |
| Colour | grey, shade not standardised |
| Packaging | kit: 3 drums of 50 l each (3×47 kg = 141 kg) + 50 kg bag of ammophos |
| Application method | dilution with water |
| Application temperature | from +10 °C to +35 °C; humidity not above 80 % |
| Drying | intercoat 24 h at +18…+20 °C; final formation after 5–6 days |
| Compatible primers and topcoats | primers GF-0163, GF-021 or FL-03K |
| Shelf life | 6 months from the date of manufacture; storage from −5 °C to +30 °C |
| Standards | TU 20.30.22.210-064-66828143-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component water-resistant compound for fire protection of cables in tunnels and flood-prone zones, withstands precipitation an hour after application.
EI90 fire protection system for air ducts: NATRSIL-S 541 compound and TEKh MAT KF foil-faced mineral wool mat.
Solvent-borne fire protection paint for steel structures up to R90, applied in frost down to −15 °C; 25 kg euro pail.
EI150 fire protection system for air ducts: NATRSIL-S 541 compound and TEKh MAT KF foil-faced basalt mat.
Water-based fire protection paint for cables and cable structures, complies with GOST R 53311 (flame damage length under 1.5 m).
EI30 fire protection system for air ducts: NATRSIL-S 541 adhesive compound and Folma-Kholst KhF foil-faced thermal insulation fabric.