Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Grunt-2K/PR — epoxy pore-filling primer
ELAKOR

Elakor-ED Grunt-2K/PR — epoxy pore-filling primer

Floor primers

This epoxy pore-filling primer contains not more than 8 % solvent and is suitable for almost any building substrate: concrete from M150, sand concrete, cement self-levelling floors, wood and plastic. It is applied by roller, brush or trowel in 1–2 coats until the surface looks like wet concrete under epoxy and polyurethane coatings, and mixed with sand it is used for filling. The pot life of the mix is at least 40 minutes, application at +5…+25 °C; according to the technical data sheet, the primer is permitted at food and pharmaceutical plants.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typefloor primers
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, food and pharmaceutical
Basetwo-component epoxy pore-filling primer with solvent (not more than 8%); composition: epoxy resin, solvent, filler, hardener, functional additives
Colourcomp. A – white opaque liquid; comp. B – transparent liquid from yellow to brown
Packaging“A” + “B” = Kit 20 kg + 5 kg = 25 kg
Application methodPriming of floors, walls, ceilings and structures under epoxy and polyurethane coatings; protective pore-filling impregnation; filling (mixed with sand). Substrates: concrete at least M150, sand concrete, cement self-levelling floors, plastic, wood; new concrete cured for at least 28 days, moisture not more than 4 wt%, relative air humidity not more than 80%, surface 3°C above the dew point. Rollers, brushes, flat metal or rubber trowel; 1-2 coats until it looks like wet concrete.
Application temperaturesurface and air: +5°C…+25°C; materials: +15°C to +20°C
Curingpot life after mixing at (20±2)°C at least 40 min; drying to degree 3 at (20±2)°C not more than 8 h; drying between coats 12-24 h, but not more than 48 h
Key propertiesA:B ratio by weight 4:1; solids content 92%; mix density 1.28±0.02 kg/l; adhesion to glass not more than 1 point; adhesion to concrete (tested up to M650 (B50)) – failure in concrete; service temperature -30...+80°C continuous, short-term for up to 60 min up to +140°C; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption100-150 g/m² per coat (1-2 coats)
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR