ELAKOR
Elakor-ED Grunt-2K/PR — epoxy pore-filling primer
Two-component epoxy primer with 92 % solids content for closing the pores of concrete under epoxy and polyurethane floors.
Price on request
ELAKOR
Elakor-ED Binder-2K/T Epoxy Compound — binder for stone carpet
This two-component compound binds coloured quartz sand, pebbles, gravel, granite and marble screenings into a framework coating of the “stone carpet” type. Such coatings are made indoors and outdoors — on paths, paved areas and in decorative elements. The substrate is concrete or sand-cement screed of at least M200, brick or stone, primed with epoxy primer; the laying time of the mix is not more than 40 minutes, film lightfastness 5 (“good”).
Specifications
| Manufacturer | Elakor — OOO “TEOKHIM-PROM”, Moscow Region |
|---|---|
| Type | floor material |
| Use | outdoor areas, decorative |
| Base | thixotropic two-component epoxy compound without organic solvents (binder for stone carpet, stone chippings) |
| Colour | film hard, flexible, glossy, uniform |
| Packaging | “A” + “B” = Kit 20 kg + 9.2 kg = 29.2 kg |
| Application method | Framework coatings and products with fillers (coloured quartz sand, pebbles, gravel, granite and marble screenings): “stone carpet”, paths and areas. Substrate: concrete or sand-cement screed at least M200, brick, stone (metal, wood – after consultation); surface primed with epoxy primer; surface 3°C above the dew point. Mix A+B, add filler until fully wetted, spread immediately; laying time not more than 40 min. |
| Application temperature | air and surface: from + 5 to + 22°C; binder and filler: from + 10 to + 20°C |
| Curing | drying time to degree 3 at 20°C – not more than 8 hours |
| Key properties | A : B ratio 100 : 45; density 1.06; non-volatiles 100%; adhesion to glass 1 point; film resistance to static exposure to water at least 48 hours, xylene at least 48 hours, butyl acetate at least 24 hours; lightfastness on the “Lightfastness Scale” – 5 (good) |
| Consumption | per 1 part by weight of Binder – 15-25 parts by weight of Filler (depending on the fraction) |
| Shelf life | 12 months in the manufacturer's original packaging; store and transport at temperatures from 0°C to 25°C |
| Standards | Fire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED” |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ELAKOR
ELAKOR
Elakor-PU Grunt-25 — repair polyurethane primer for old coatings
Bonding polyurethane primer for repairs: applied over old epoxy and polyurethane floors and very dense concrete.
Price on request
ELAKOR
Elakor-PTs T1 — polyurethane-cement self-levelling floor
Self-levelling polyurethane-cement floor for workshops and warehouses with light and moderate mechanical loads and heat resistance requirements.
Price on request
ELAKOR
Elakor-PU Lyuks Lak-R Elastic Gloss — elastic varnish for sports floors
Elastic gloss polyurethane varnish for the finishing coat of elastic and sports floors and floors with vibration loads.
Price on request
ELAKOR
Elakor-PU Lyuks Lak-R Gloss — transparent lightfast floor varnish
Gloss transparent polyurethane varnish that does not yellow in light, for the finishing protection of polymer and decorative floors.
Price on request
ELAKOR
Elakor-PU Lyuks Emal Gloss — lightfast polyurethane floor enamel
Gloss polyurethane enamel that does not yellow in the sun, for floors and walls outdoors, in wet rooms and in food production.
Price on request