Kristallizol Monolit — waterproofing admixture for concrete
Integral admixture for concrete mix that raises the water-tightness grade of concrete by 5 steps; for concrete from M150.

Kristallizol Gidroplomba is needed to shut off a pressurised leak through a crack, joint or service opening within a few minutes. The leak area is chased out and washed, the mix is combined with water at room temperature, stirred for 30 s, rolled into a ball and driven into the hole, holding it there for 3–5 min. The compound sets in 3 min, is resistant to aggressive media and is fire-safe. After the water is stopped, the hole is additionally waterproofed with Kristallizol Shovny.
| Manufacturer | Kristallizol — OOO “PK GidroStroyKomplekt”, Mikhaylov |
|---|---|
| Type | hydraulic plugs |
| Use | leak repair, foundations and basements |
| Base | dry mix of Portland cement, sand and chemically active additives; rapid-hardening compound for stopping local active leaks |
| Packaging | 2 kg bucket |
| Application method | clean the area of the pressurised leak of weak fragments, oils and paint, chase out to a depth of at least 30 mm and a width of 20 mm, wash out; pour the required amount of mix into a container wetted with water, mix with water at room temperature (100–150 ml per 1 kg), stir with a damp spatula for 30 s, form a ball, drive it into the hole with the active leak and hold for 3–5 min; then waterproof the hole with Kristallizol Shovny |
| Application temperature | from +5 °C |
| Curing | setting time 3 min; hardening time from 30 s to 3 min |
| Key properties | high water-stopping properties; resistant to aggressive media; air-permeable; fire-safe |
| Consumption | 2 kg/dm³ (400 g makes a ball 9–10 cm in diameter) |
| Shelf life | at least 6 months from the date of manufacture in intact factory packaging |
| Standards | TU 5745-001-38213907-11; declaration of conformity ROSS RU D-RU.NA45.V.01124/20 of 23.12.2020, valid until 22.12.2030 (according to GOST 31357-2007; Universal, Shovny, Shovny Sverkhprochny, Gidroplomba) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Integral admixture for concrete mix that raises the water-tightness grade of concrete by 5 steps; for concrete from M150.
Penetrating waterproofing applied by brush or roller to new concrete without water seepage; water-tightness W12.
Liquid concrete activator used after chemical cleaning with Kristallizol KHIMFREZ; increases the bond of a new layer by 1.5–3 times.
Penetrating cement waterproofing for foundations, basements, tanks and hydraulic structures; water-tightness W12.
Penetrating repair plaster for restoring concrete and brick masonry with simultaneous waterproofing; water-tightness W8.
Non-shrink penetrating mix for sealing joints, butt joints, cracks, junctions and utility penetrations; water-tightness W8.