Kristallizol Remontny — penetrating repair plaster
Penetrating repair plaster for restoring concrete and brick masonry with simultaneous waterproofing; water-tightness W8.

Kristallizol Monolit admixture is added to concrete during batching — diluted in water into the concrete mixer or together with the dry sand-cement mix, mixing for 20 min. It raises the water-tightness grade of concrete by 5 steps and its strength by 1 step, without changing the pot life of the mix or reducing the protective properties of concrete with respect to reinforcement. It is used on hydraulic structures, in tunnels, overpasses and bridges, on civil and industrial facilities and in screeds. The concrete grade must be at least M150, and the admixture is compatible with plasticising and anti-freeze admixtures.
| Manufacturer | Kristallizol — OOO “PK GidroStroyKomplekt”, Mikhaylov |
|---|---|
| Type | waterproofing material |
| Use | hydraulic structures and dams, tunnels and metro, bridge structures, foundations and basements |
| Base | integral waterproofing admixture for concrete mix |
| Packaging | 15 kg bucket |
| Application method | into the concrete mix: dilute in a small amount of water, add to the concrete mix, mix in a concrete mixer for 20 min; into a dry mix: blend with the dry sand-cement mix, add water and mix until homogeneous for 20 min; concrete grade not lower than M150; compatible with plasticising and anti-freeze admixtures |
| Key properties | raises the water-tightness grade of concrete by +5 steps; pot life of the mortar mix unchanged; frost resistance at least 300; strength increase by 1 step; does not reduce the protective properties of concrete with respect to reinforcement |
| Consumption | 1 % of cement weight (approximately: M250 — 3.2 kg, M300 — 3.7 kg, M350 — 4.2 kg per 1 m³ of concrete) |
| Shelf life | at least 12 months |
| Standards | TU 5745-001-38213907-11; declaration of conformity ROSS RU D-RU.AZh40.V.01022/20 of 08.04.2020, valid until 07.04.2030 (according to GOST R 56703-2015; W12, W12-Kistevoy, Remontny, Monolit, Elast) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Penetrating repair plaster for restoring concrete and brick masonry with simultaneous waterproofing; water-tightness W8.
Non-shrink penetrating mix for sealing joints, butt joints, cracks, junctions and utility penetrations; water-tightness W8.
Liquid concrete activator used after chemical cleaning with Kristallizol KHIMFREZ; increases the bond of a new layer by 1.5–3 times.
Penetrating waterproofing applied by brush or roller to new concrete without water seepage; water-tightness W12.
Penetrating cement waterproofing for foundations, basements, tanks and hydraulic structures; water-tightness W12.
Rapid-hardening hydraulic plug for stopping pressurised leaks through cracks, joints and service openings; sets in 3 min.