LEVL (INGRI)
LEVL PoliCem PU 013 ER SL — antistatic non-sparking PU-cement floor
Antistatic and non-sparking PU-cement coating for the aviation, electronics, oil refining and chemical industries; 10⁴–10⁶ ohm.
Price on request
LEVL (INGRI)
LEVL CemPol 15 SL — self-levelling non-sparking floor
LEVL CemPol 15 SL non-sparking coating is poured and levels itself: it is spread with a squeegee over LEVL Base 200 primer and rolled with a spiked roller, by hand or by machine. The mix of special cements and marble aggregate is intended for explosion-hazard production and storage premises. After 28 days compressive strength is at least 40 MPa, flexural 7 MPa, bond to substrate 2 MPa; at +20 °C it can be walked on after 4–6 hours.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | special cements, marble aggregate, modifying additives |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 3.25–3.50 kg of water per bag |
| Application method | self-levelling non-sparking coating over LEVL Base 200 primer (0.4 kg/m²): squeegee + spiked roller; manual and machine application |
| Application temperature | air and substrate +5…+30 °C; humidity at least 50% |
| Curing | pot life at +20 °C 15 minutes; at +20 °C: foot traffic ~4–6 hours, light loads ~1–2 days, full strength gain ~14–28 days |
| Key properties | Non-sparking; compressive strength after 28 days at least 40 MPa; flexural at least 7 MPa; abrasion (wear) no more than 1.2 g/cm²; bond at least 2 MPa; mechanical loads: moderate; service temperature from −40 °C to +60 °C |
| Layer thickness | 5–30 mm |
| Consumption | 2.0 kg/m²/mm (approximate); 10–60 kg/m² for 5–30 mm |
| Shelf life | 6 months |
| Standards | TU 23.64.10-073-94613022-2019; GOST 310.4, GOST 13087, GOST R 58277-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL RemTixo Rapid AF — thixotropic repair compound for work in frost
Rapid-hardening fibre-reinforced mix for repairing concrete in cold stores, on roads and airfields at air temperatures down to −10 °C.
Price on request
LEVL (INGRI)
LEVL Top C50 — topping for floors with service temperatures up to +200 °C
Economical hardening topping for workshops, warehouses and car parks with strength from 50 MPa and a service range from −40 to +200 °C.
Price on request
LEVL (INGRI)
LEVL Self 6 — cementitious levelling compound for work from +5 °C
Self-levelling compound under polymer and cementitious floors that can be laid at temperatures from +5 °C; bond to substrate 2 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 118 — multifunctional epoxy primer
Epoxy primer under LEVL floors with the best surface wetting in the range; also a filler, binder, injection compound and glass-mat adhesive.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 014 — highly filled polyurethane-cement floor
Thick-layer PU-cement coating for food and chemical production with impact and thermal loads, up to steam cleaning.
Price on request