LEVL (INGRI)
LEVL Top WL — mortar topping for restoring old concrete floors
High-strength cement mix laid over old concrete indoors and outdoors; compressive strength at least 70 MPa, flexural strength 8 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 014 — highly filled polyurethane-cement floor
Highly filled LEVL PoliCem PU 014 polyurethane-cement is designed for harsh conditions: high mechanical and impact loads, chemicals and sharp temperature changes. In the thick-layer version the coating suits freezers down to −45 °C and withstands steam cleaning up to +120 °C. Compressive strength is at least 50 MPa, flexural 13 MPa, bond 2.0 MPa. The surface is smooth-textured matt, laid over PoliCem PU 05 primer; colours: silver grey, beige, green, dark grey and red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics, wet rooms |
| Base | three-component, highly filled: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, dark grey, red-brown (smooth-textured matt) |
| Packaging | 31.24 kg kit: A — metal pail 3.00 kg; B — plastic jerrycan 3.24 kg; C — paper bag 25 kg; A : B : C = 1.00 : 1.08 : 8.33 |
| Application method | over PoliCem PU 05 primer with a broadcast: gauge rake + spiked roller (smooth, 6–12 mm) or with a sand broadcast and a PU 015 seal coat (textured, 8 mm) |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~48 h / ~3 days / ~7 days; +30 °C ~24 h / ~2 days / ~5 days |
| Key properties | Compressive strength at 28 days at least 50 MPa; flexural at least 13 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C; at 9 mm and more: freezers at −45 °C and steam cleaning up to +120 °C |
| Layer thickness | from 6 to 12 mm |
| Consumption | 12.8–25.6 kg/m² for 6–12 mm (smooth); 10.5 kg/m² + sand broadcast 6.9 kg/m² + PU 015 1.0 kg/m² (textured, 8 mm) |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST 5802, GOST 310.4, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Stiff mortar mix for new and repaired floors of ports, container yards and car parks; strength 60 MPa, frost resistance F1 200.
Price on request
LEVL (INGRI)
LEVL Coat 075 — MMA curing accelerator for winter work
Liquid accelerator for laying LEVL Coat 171, 271 and 573 carboacrylate floors at temperatures from 0 to −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Coat 307 — low-density epoxy self-levelling floor
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.
Price on request
LEVL (INGRI)
LEVL RemTixo Grout AF — pourable repair compound for work down to −10 °C
Non-shrink pourable mix for concrete repair in operating cold stores, on roads and airfields; 25 MPa compressive strength after 2 hours.
Price on request