LEVL (INGRI)
LEVL PoliCem PU 016 — thixotropic PU-cement for skirtings and coves
Compound for vertical surfaces, skirtings and coves in PoliCem polyurethane-cement systems; service up to +90 °C, resistant to hot water.
Price on request
LEVL (INGRI)
LEVL RemTixo Grout AF — pourable repair compound for work down to −10 °C
LEVL RemTixo Grout AF pourable compound makes it possible to repair concrete in operating cold stores: work is permitted at air temperatures down to −10 °C. At sub-zero temperatures the mix is gauged with hot water and placed on a pre-heated substrate. Compressive strength is 25 MPa after 2 hours and 60 MPa after one day at +20 °C, and at −10 °C 15 MPa after 5 hours; at 28 days at least 75 MPa. Water impermeability W16, frost resistance F2300; the compound is also used on roads and airfields.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | special cements, modifying additives (pourable, non-shrink, rapid-hardening) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 2.8–2.9 kg of water per bag |
| Application method | pourable repair of concrete and reinforced concrete, including in operating cold stores; roads, airfields; at sub-zero temperatures: over a pre-heated substrate, mixed with hot water (+40…+60 °C) |
| Application temperature | air from −10 °C to +20 °C; substrate 0…+20 °C; material from +5 °C |
| Curing | pot life at +20 °C 15 minutes; compressive strength 25 MPa after 2 hours, 60 MPa after 24 hours (at +20 °C); at −10 °C: 15 MPa after 5 hours |
| Key properties | Compressive strength at least 25 / 60 / 75 MPa (2 h / 24 h / 28 days); flexural 4.5 / 8 / 12 MPa; bond at least 2.5 MPa; W16; F2300; Fkz100; service temperature from −40 °C to +60 °C |
| Layer thickness | 10–100 mm (thicker with coarse aggregate) |
| Consumption | 2.05 kg/m²/mm; 20.5–205 kg/m² for 10–100 mm |
| Shelf life | 6 months |
| Standards | TU 5745-025-94613022-10 with Amendment No. 2; GOST 310.4, GOST R 58277, GOST 12730.5, GOST 10060; not subject to fire certification |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Concrete Strong 12 — lithium silicate impregnation for concrete floors
Hardening and dustproofing lithium silicate impregnation with 11 % non-volatile content for concrete, topping and polished floors.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Matt polyurethane-cement floor for dairy, brewing and meat production, pharmaceuticals and chemicals; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Stiff mortar mix for new and repaired floors of ports, container yards and car parks; strength 60 MPa, frost resistance F1 200.
Price on request
LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 101 Sleek — epoxy primer under LEVL self-levelling floors
Epoxy primer for mineral substrates under epoxy and polyurethane floors, fillers and coves; adhesion to concrete at least 2.5 MPa.
Price on request