LEVL (INGRI)
LEVL RemTixo Grout 400 SF — ultra-fast pourable repair compound, class R4
Pourable non-shrink mix for concrete repair and grouting of equipment foundations; 8 MPa compressive strength after just one hour.
Price on request
LEVL (INGRI)
LEVL Coat 008 — epoxy levelling filler under polymer floors
Before a polymer coating is laid, an uneven or porous substrate, including one after shot blasting, is levelled with LEVL Coat 008 epoxy filler. The thixotropic paste with quartz filler closes pores, cracks and potholes and evens out the colour of the substrate. It is applied with a flat steel trowel as a scrape coat over LEVL Coat 101 or 108 primer; it must not be thinned with solvent. Adhesion to the substrate is at least 2.5 MPa, service from −25 to +60 °C; 33 kg kit.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, retail and public buildings, warehouses and logistics |
| Base | epoxy resin + cycloaliphatic hardener; component A is a thixotropic paste with quartz filler |
| Colour | light grey |
| Packaging | kit A+B = 33 kg (A: 20 l metal pail, B: 3–5 l jerrycan); A : B = 10 : 1 (by weight) |
| Application method | thick levelling and pore-sealing filler layer in wall and floor coating systems (including after shot blasting) over LEVL Coat 101 / 108 primer: flat steel trowel as a scrape coat; slope no more than 2 %; must not be thinned with solvent |
| Application temperature | air +10…+30 °C (recommended +17…+23 °C); substrate +10…+30 °C (recommended +15…+25 °C); material +15…+25 °C; air humidity up to 80 %; substrate moisture no more than 5.0 % by weight; 3 °C above the dew point |
| Curing | recoat interval at +20 °C: minimum 24 h, maximum 48 h |
| Key properties | Adhesion to substrate at least 2.5 MPa (failure in the concrete); tensile strength at least 7 MPa; mix density 1.92 ± 0.1 kg/dm³; non-volatile content at least 97 %; pot life at least 30 min (+10 °C ~50, +20 °C ~30, +30 °C ~15 min); bridges cracks, pores and potholes, evens out the colour of the substrate; service temperature from −25 °C to +60 °C |
| Layer thickness | admissible 0.8–3.0 mm |
| Consumption | theoretical 1.92 kg/m² per 1 mm of thickness; example: 1.5 mm layer — 2.88 kg/m² |
| Shelf life | 12 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 20.30.22-124-94613022-2023; substrate per SP 71.13330.2017 (cl. 8.12.2, Table 8.11), waterproofing per SP 29.13330.2011; test methods GOST 31992.1, GOST 31939, GOST 28574, GOST 11262-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 318 — self-levelling epoxy floor
Gloss RAL epoxy coating for warehouses, workshops, car parks, healthcare and food production; Shore D hardness at least 75.
Price on request
LEVL (INGRI)
LEVL CemPol 100 SL — non-sparking pourable concrete coating
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL RemTixo Finish 5 — cementitious filler for concrete surfaces
Thin-layer polymer-cement filler for levelling concrete and filling pores and cavities; bond to substrate at least 2.0 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 351 AS — antistatic polyurethane self-levelling floor
Smooth antistatic PU coating with chemical resistance and combustibility group G1 for chemicals, hangars, electronics and laboratories; 10⁶–10⁹ ohm.
Price on request