LEVL (INGRI)
LEVL Coat 351 — elastic polyurethane self-levelling floor
Gloss, highly elastic RAL self-levelling coating that bridges cracks, for workshops, warehouses, offices and sports facilities.
Price on request
LEVL (INGRI)
LEVL Top Silex — silicon carbide topping for industrial floors
LEVL Top Silex is based on cement and silicon carbide filler, which sets it apart from quartz and corundum mixes. The topping is worked into freshly placed concrete with a power trowel and protected with LEVL Cure 100. In natural colour, compressive strength after 28 days is at least 90 MPa with abrasion up to 0.15 g/cm²; in coloured versions, at least 70 MPa and up to 0.20 g/cm². It suits workshops, warehouses, car parks and public buildings with very significant mechanical loads.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, silicon carbide filler, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 90 (natural) / 70 (coloured) MPa; abrasion (wear) no more than 0.15 (natural) / 0.20 (coloured) g/cm²; mortar density at least 2350 kg/m³; mechanical loads: very significant; service temperature from minus 40 °C to +60 °C (short-term up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: significant loads 3...5, very significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months; storage at +5...+30 °C |
| Standards | TU 5745-051-94613022-2015; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 308 — economical filled epoxy self-levelling floor
Epoxy compound used only with quartz sand, for warehouses, workshops, car parks and wet rooms; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL Prime Concrete — bonding layer for cement mortars over old concrete
Dry cement mix for a contact layer between old concrete and new LEVL Top WL or CemPol 10 mortar; bond at least 1.5 MPa.
Price on request
LEVL (INGRI)
LEVL Top Corund — corundum topping for heavily loaded floors
Hardening dry mix with corundum for concrete floors under very significant mechanical loads; compressive strength at least 90 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 221 AR — acrylic paint for outdoor concrete
Self-priming acrylic RAL coating for concrete and metal exposed to precipitation and UV; applied at temperatures from −20 °C.
Price on request