PLASTGUARD ECO — economy-class profiled membrane

The economy option of the range, PLASTGUARD ECO, is a black profiled membrane of high-density polyethylene with cone-shaped studs. It distributes the load on the soil, protects waterproofing and thermal insulation of foundations and ballasted roofs, cuts off capillary moisture from the slab and serves as an underlay for paths. Compressive strength is 180 kPa, flexibility is retained down to −50 °C, and conventional durability is at least 100 years. The membrane is not stand-alone waterproofing.

Specifications

Manufacturer	PENOPLEX (PLASTFOIL, PLASTGUARD) — OOO “PENOPLEX SPb”
Type	waterproofing material
Use	foundations and basements, roofs
Base	profiled membrane of high-density polyethylene (HDPE) with studs shaped as truncated cones
Colour	black
Packaging	rolls 20 × 2 m or 20 × 1 m
Application method	horizontally — loose laying; vertically — mechanical fastening along the top edge above the waterproofing level (aluminium clamping bars, Ø50 mm washers, screws and PROPLUG dowels, 200 mm spacing); overlap 150–200 mm, PLASTGUARD joining tapes if necessary
Key properties	mass 400 g/m²; compressive strength 180 kPa; base thickness 0.4±0.1 mm; maximum tensile force 180/130 N/50 mm (lengthwise/crosswise); cone stud height 8 mm; elongation at maximum force at least 30%; flexibility not higher than −50 °C; dimensional change at 80 °C over 6 h not more than 2%; water absorption not more than 1%; watertightness at 0.001 MPa for 24 h — no traces of water penetration; conventional durability at least 100 years; G4 V3 RP4
Layer thickness	base 0.4±0.1 mm, stud 8 mm
Shelf life	2 years from the date of manufacture; on pallets, vertically, in an enclosed room in a single tier, not closer than 1 m to heating appliances; under a canopy for up to 30 days
Standards	TU 23.99.12-039-54349294-2025; GOST R 70434

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.