PLASTGUARD GEO — profiled membrane with geotextile for drainage

A filter geotextile thermally bonded to a profiled high-density polyethylene sheet turns PLASTGUARD GEO into wall drainage for buried structures. The membrane protects the waterproofing at the same time, but does not replace it. Compressive strength is 350 kPa, maximum tensile force is 450 N/50 mm along the roll, flexibility is retained down to −50 °C, and conventional durability is at least 100 years. The certificate of conformity for this grade states production in Zavolzhye.

Specifications

Manufacturer	PENOPLEX (PLASTFOIL, PLASTGUARD) — OOO “PENOPLEX SPb”, Zavolzhye
Type	waterproofing material
Use	foundations and basements, roofs
Base	profiled membrane of high-density polyethylene (HDPE) with studs shaped as truncated cones and a thermally bonded filter geotextile
Packaging	rolls 20 × 2 m
Application method	horizontally — loose laying; vertically — mechanical fastening along the top edge above the waterproofing level (aluminium clamping bars, Ø50 mm washers, screws and PROPLUG dowels, 200 mm spacing); overlap 150–200 mm, PLASTGUARD joining tapes if necessary
Key properties	mass 600 g/m²; compressive strength 350 kPa; base thickness 0.5±0.01 mm; maximum tensile force 450/400 N/50 mm (lengthwise/crosswise); cone stud height 8 mm; elongation at maximum force at least 30%; flexibility not higher than −50 °C; dimensional change at 80 °C over 6 h not more than 2%; water absorption not more than 1%; watertightness at 0.001 MPa for 24 h — no traces of water penetration; conventional durability at least 100 years; G4 V2 RP1
Layer thickness	base 0.5±0.01 mm, stud 8 mm
Shelf life	2 years from the date of manufacture; on pallets, vertically, in an enclosed room in a single tier, not closer than 1 m to heating appliances; under a canopy for up to 30 days
Standards	TU 23.99.12-032-54349294-2023; GOST R 70434; certificate of conformity ROSS RU.32001.04IBF1.OSP28.50415 valid until 01.04.2027 (PLASTGUARD 400, 500, Geo; production — “Volga” branch of OOO “PENOPLEX SPb”, Zavolzhye)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.