Vetonit
Vetonit remokor L-60 — high-strength flowable mortar, class R4
High-strength pourable class R4 mix for repairing bridge slabs, beams, roads, airfields and hydraulic structures; 60 MPa compressive at 28 days.
Price on request
Vetonit
Vetonit remokor NS-40 — fast class R3 finishing mortar for work in frost
At air temperatures from −10 to +18 °C work is carried out with the rapid-hardening thixotropic Vetonit remokor NS-40 of class R3, intended for urgent repair and finishing of reinforced concrete, including on vertical and overhead surfaces. First a primer coat of the same mortar in a more fluid consistency is scrubbed in, then the main layer is applied “wet on wet”; only as much is mixed as can be used within 10–20 min. The compressive strength is at least 5 MPa after 2–3 h and 40 MPa after 28 days, water impermeability W12.
Specifications
| Manufacturer | Vetonit — OOO “Saint-Gobain Stroitelnaya Produktsiya Rus”, Arzamas |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, hydraulic structures and dams |
| Base | dry mix based on cement, graded sand (maximum size 0.63 mm) and special additives with polymer fibre; non-shrink, rapid-hardening, fine-grained thixotropic compound |
| Colour | grey |
| Packaging | three-ply paper bag with a polyethylene middle ply, 25 kg |
| Application method | clean the concrete, remove weak areas (grinding, milling, sandblasting, shot blasting), substrate roughness at least 5 mm; at above-zero temperatures dampen 24 h beforehand and before the work, at sub-zero temperatures — do not dampen; mix an amount that can be used within 10–20 min; pour the dry mix into the water, mix for at least 3 min, pause 1 min, remix; temperature of the ready mortar +24…+26 °C; mechanically with a plastering machine or by hand with a trowel; a primer coat of the same mortar in a more fluid consistency is mandatory (scrub in with a stiff brush), main layer “wet on wet”; thicker than 35 mm — in several layers |
| Application temperature | –10…+18 °C (air) |
| Curing | keep moist, protect from precipitation, sun and wind for 24 hours; a film-forming curing compound may be used; at sub-zero temperatures hardening and strength gain slow down |
| Key properties | class R3; maximum aggregate size 0.63 mm; water demand 3.7–4.3 l per 25 kg (15–17 %); working time 10–20 min; compressive strength at least 5 MPa (2–3 h), 10 MPa (1 day), 20 MPa (7 days), 40 MPa (28 days) (actual 17.6 / 24.8 / 34.8 / 63.0); compressive modulus of elasticity at least 15 GPa (actual 28.4); bond strength to the substrate at least 1.5 MPa (actual 2.4); after restrained shrinkage 2.2 MPa, after restrained expansion 2.3 MPa; frost resistance grade at least F₁300; water impermeability at least W12 (actual W20); chloride ions no more than 0.1 %; carbonation resistance no more than 2.07×10⁻⁴ cm2/s (actual 1.6×10⁻⁶); chloride ion penetration resistance (0–2 mm, 28 days) no more than 0.09 N/mm2; combustibility group NG |
| Shelf life | 6 months from the date of manufacture in factory packaging in a dry room at relative humidity no more than 60 % |
| Standards | STO 56846022-004-2024 “Dry repair mixes”; GOST R 56378-2015 (declaration); declaration of conformity ROSS RU D-RU.RA01.V.40335/26; certificate of conformity to fire safety requirements RU C-RU.PB37.V.01230/24; SGR KG.11.01.09.008.E.000345.01.25 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Vetonit
Vetonit
Vetonit remokor LS-60 — rapid-hardening pourable R4 mortar for urgent repair
Rapid-hardening class R4 flowable mix for urgent repair of roads, airfields and floors; load after 2–3 h, work down to −10 °C.
Price on request
Vetonit
Vetonit remokor TF-60 — thixotropic class R4 mortar with metal fibre
Thixotropic class R4 mix with polymer and metal fibre for columns, arches, bridge slabs and dams under impact loads; flexural strength 10 MPa.
Price on request
Vetonit
Vetonit remokor T-45 — thixotropic class R4 mortar on cement with polymers
Fine-grained thixotropic class R4 mix with increased crack resistance for repairing reinforced concrete on walls and ceilings.
Price on request
Vetonit
Vetonit remokor N-35 — fine-grained thixotropic mortar, class R3
Fine-grained thixotropic class R3 mix for finishing repair of reinforced concrete and for eliminating pores and cavities on walls and ceilings; W8.
Price on request
Vetonit
Vetonit remokor TS-60 — rapid-hardening thixotropic R4 mortar down to −10 °C
Rapid-hardening thixotropic class R4 mix for repairing hydraulic structures, bridges, roads and airfields without heating in frost down to −10 °C.
Price on request