Vetonit
Vetonit remokor 05 — rebar corrosion protection and bonding coat
Cement-polymer compound with corrosion inhibitors for rebar protection and as a bonding coat under remokor repair mortars; 5 and 25 kg bags.
Price on request
Vetonit
Vetonit is a brand of OOO Saint-Gobain Stroitelnaya Produktsiya Rus. The remokor repair series is made in Arzamas and covers the whole cycle of reinforced concrete restoration: remokor 05 protects rebar and forms a bonding coat, the thixotropic N-35, N-40, NS-40, T-45, T-60, TF-60 and TS-60 are applied to walls and ceilings, and the flowable L-45, L-60, LF-60 and LS-60 are poured into formwork. The series includes grades with metal fibre and rapid-hardening grades rated for frost down to −10 °C.
The Remokor-Krit polyurethane polymer concrete for expansion joints of bridges and car parks is made under the Vetonit brand by OOO NPF Adgeziv from Vladimir.
Type
Application
Vetonit
Vetonit remokor L-45 — pourable non-shrink repair mortar, class R4
Class R4 flowable mix for concreting densely reinforced and prestressed structures in formwork where shotcrete is impossible; 45 MPa.
Price on request
Vetonit
Vetonit remokor L-60 — high-strength flowable mortar, class R4
High-strength pourable class R4 mix for repairing bridge slabs, beams, roads, airfields and hydraulic structures; 60 MPa compressive at 28 days.
Price on request
Vetonit
Vetonit remokor LF-60 — pourable class R4 mortar with steel fibre
Class R4 flowable mix with polymer and steel fibre for structures under impact and dynamic loads; flexural strength 10 MPa at 28 days.
Price on request
Vetonit
Vetonit remokor LS-60 — rapid-hardening pourable R4 mortar for urgent repair
Rapid-hardening class R4 flowable mix for urgent repair of roads, airfields and floors; load after 2–3 h, work down to −10 °C.
Price on request
Vetonit
Vetonit remokor N-35 — fine-grained thixotropic mortar, class R3
Fine-grained thixotropic class R3 mix for finishing repair of reinforced concrete and for eliminating pores and cavities on walls and ceilings; W8.
Price on request
Vetonit
Vetonit remokor N-40 — thixotropic levelling mortar, class R3
Fine-grained thixotropic class R3 mix for levelling, finishing and protecting reinforced concrete against aggressive media; 40 MPa compressive, W12.
Price on request
Vetonit
Vetonit remokor NS-40 — fast class R3 finishing mortar for work in frost
Rapid-hardening fine-grained class R3 mix for urgent repair and finishing of reinforced concrete on walls and ceilings at temperatures down to −10 °C.
Price on request
Vetonit
Vetonit remokor T-45 — thixotropic class R4 mortar on cement with polymers
Fine-grained thixotropic class R4 mix with increased crack resistance for repairing reinforced concrete on walls and ceilings.
Price on request
Vetonit
Vetonit remokor T-60 — high-strength thixotropic mortar, class R4
Thixotropic non-shrink class R4 mix for repairing beams, bridge slabs, pylons and piers by hand or by spraying; 60 MPa compressive.
Price on request
Vetonit
Vetonit remokor TF-60 — thixotropic class R4 mortar with metal fibre
Thixotropic class R4 mix with polymer and metal fibre for columns, arches, bridge slabs and dams under impact loads; flexural strength 10 MPa.
Price on request
Vetonit
Vetonit remokor TS-60 — rapid-hardening thixotropic R4 mortar down to −10 °C
Rapid-hardening thixotropic class R4 mix for repairing hydraulic structures, bridges, roads and airfields without heating in frost down to −10 °C.
Price on request
Vetonit
Vetonit Remokor-Krit — polyurethane polymer concrete for expansion joints
Three-component polyurethane polymer concrete for transition zones and expansion joints of bridges and car parks; vehicle traffic after 4–6 h.
Price on request
No materials match these filters.