Vetonit
Vetonit remokor N-40 — thixotropic levelling mortar, class R3
Fine-grained thixotropic class R3 mix for levelling, finishing and protecting reinforced concrete against aggressive media; 40 MPa compressive, W12.
Price on request
Vetonit
Vetonit remokor 05 — rebar corrosion protection and bonding coat
Vetonit remokor 05 is a dry mix based on Portland cement with redispersible polymer powder and corrosion inhibitors that performs two tasks in repair. Rebar cleaned to Sa 2 or St 2 is coated with it using a soft brush in two applications, and on dampened concrete it is applied with a stiff brush as a bonding coat onto which remokor repair mortars are placed “wet on wet”. The compound is universal for the whole series, is used under chloride attack and on overhead surfaces, and is permitted in tanks with drinking water.
Specifications
| Manufacturer | Vetonit — OOO “Saint-Gobain Stroitelnaya Produktsiya Rus”, Arzamas |
|---|---|
| Type | rebar protection and bonding compounds |
| Use | tanks and treatment plants, columns and beams, bridges and overpasses |
| Base | dry mix based on Portland cement, fine quartz sands, redispersible polymer powder and special additives (corrosion inhibitors); binder — special cement and polymers |
| Colour | grey |
| Packaging | three-ply paper bag with a polyethylene middle ply, 25 kg; polyethylene bag, 5 kg |
| Application method | rebar corrosion protection: clean the rebar to at least Sa 2 or St 2 and dry it, remove the concrete around the rebar about 300 mm beyond the corrosion zone; main repair — not earlier than the next day. Bonding coat: with a stiff brush onto the dampened substrate, place the “remokor” repair mortar “wet on wet”. Water 1.1–1.2 l per 5 kg, 5.5–6 l per 25 kg; mixing 3–5 min, pause 5 min, remixing; do not add cement or aggregates |
| Application temperature | +5…+35 °C (air and substrate); above +5 °C for 3 days after the work |
| Curing | protect from drying out, precipitation, direct sunlight and wind; main repair work — after the compound on the rebar has hardened, usually not earlier than the next day |
| Key properties | maximum aggregate size 0.63 mm; density 1850 kg/m3 ±5 %; working time 20 min; water demand 22–24 %; flow (cone spread) 120–230 mm; capillary water absorption no more than 0.4 kg/(m2·h0.5); water absorption at 48 h saturation no more than 8 %; water retention at least 95 %; compressive strength at least 15 MPa (7 days), 25 MPa (28 days); bond strength to the substrate at least 1.5 MPa; mortar frost resistance grade at least F15; contact zone at least Fkz25; chloride ions no more than 0.1 %; combustibility G1, V1, D1, T1; use in drinking water tanks — yes |
| Shelf life | 12 months in a 25 kg bag, 18 months in a 5 kg bag from the date of manufacture; in factory packaging in a dry room at relative humidity no more than 60 % |
| Standards | STO 56846022-004-2024 “Dry repair mixes”; GOST 31357-2007 (declaration); declaration of conformity ROSS RU D-RU.RA01.V.40827/26 from 14.10.2026 to 13.10.2031; certificate of conformity to fire safety requirements RU C-RU.PB37.V.01229/24; SGR KG.11.01.09.008.E.000346.01.25 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Vetonit
Vetonit
Vetonit remokor NS-40 — fast class R3 finishing mortar for work in frost
Rapid-hardening fine-grained class R3 mix for urgent repair and finishing of reinforced concrete on walls and ceilings at temperatures down to −10 °C.
Price on request
Vetonit
Vetonit remokor T-60 — high-strength thixotropic mortar, class R4
Thixotropic non-shrink class R4 mix for repairing beams, bridge slabs, pylons and piers by hand or by spraying; 60 MPa compressive.
Price on request
Vetonit
Vetonit remokor TF-60 — thixotropic class R4 mortar with metal fibre
Thixotropic class R4 mix with polymer and metal fibre for columns, arches, bridge slabs and dams under impact loads; flexural strength 10 MPa.
Price on request
Vetonit
Vetonit remokor T-45 — thixotropic class R4 mortar on cement with polymers
Fine-grained thixotropic class R4 mix with increased crack resistance for repairing reinforced concrete on walls and ceilings.
Price on request
Vetonit
Vetonit Remokor-Krit — polyurethane polymer concrete for expansion joints
Three-component polyurethane polymer concrete for transition zones and expansion joints of bridges and car parks; vehicle traffic after 4–6 h.
Price on request