Vetonit
Vetonit remokor TF-60 — thixotropic class R4 mortar with metal fibre
Thixotropic class R4 mix with polymer and metal fibre for columns, arches, bridge slabs and dams under impact loads; flexural strength 10 MPa.
Price on request
Vetonit
Vetonit remokor T-60 — high-strength thixotropic mortar, class R4
Beams, including prestressed ones, floor slabs, bridge slabs, pylons and piers are repaired with the thixotropic Vetonit remokor T-60 of class R4. The non-shrink mix based on special cement with aggregate up to 3 mm and polymer fibre, without metallic aggregates or chlorides, is applied with a plastering machine or a trowel “wet on wet” onto remokor 05 or onto a primer coat of the same mortar. After one day the compressive strength is at least 25 MPa, after 28 days 60 MPa, frost resistance F₁1000 / F₂300, water impermeability W16, combustibility group NG.
Specifications
| Manufacturer | Vetonit — OOO “Saint-Gobain Stroitelnaya Produktsiya Rus”, Arzamas |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, columns and beams, hydraulic structures and dams, industrial buildings, roads and airfields |
| Base | dry mortar mix, maximum aggregate size 3 mm, with polymer fibre; binder — special cement; no metallic aggregates or chlorides; non-shrink compound |
| Colour | grey |
| Packaging | three-ply paper bag with a polyethylene middle ply, 25 kg |
| Application method | clean the concrete, remove weak areas (grinding, milling, sandblasting, wet abrasive blasting, shot blasting), wash with pressurised water; clean the rebar and immediately coat it with “Vetonit remokor 05”; dampen the substrate 24 h beforehand and again before the work (matt-damp); water +10…+30 °C, mortar temperature +10…+20 °C; first the minimum amount of water, then the dry mix, mix for 3–5 min with a drill and low-speed paddle or in a concrete mixer, pause 5 min, remix, add the rest of the water if necessary; do not overdose water; mechanically with a plastering machine (wet spraying) or by hand with a trowel; without “remokor 05” a primer coat of the same mortar in a more fluid consistency is mandatory, scrubbed in with a stiff brush, main layer “wet on wet”; smooth with a float after setting; thicker than recommended — in several layers |
| Application temperature | +5…+35 °C (air and substrate) |
| Curing | keep moist, protect from precipitation, sun and wind for 5 days; a film-forming curing compound may be used; for 5 days after the work the air and substrate temperature must not be below +5 °C |
| Key properties | class R4; maximum aggregate size 3 mm; water demand 3.6–4.2 l per 25 kg (14.5–16.5 %); working time 30 min; compressive strength at least 25 MPa (1 day), 40 MPa (7 days), 60 MPa (28 days) (actual 31.0 / 51.7 / 78.7); flexural tensile strength at least 4 MPa (1 day), 8 MPa (28 days) (actual 4.4 / 8.5); compressive modulus of elasticity at least 20 GPa (actual 33.0); bond strength to the substrate at least 2 MPa; after restrained shrinkage 2.3 MPa, after restrained expansion 2.5 MPa; frost resistance grade at least F₁1000 / F₂300; water impermeability at least W16 (actual W20); chloride ions no more than 0.1 %; carbonation resistance no more than 2.07×10⁻⁴ cm2/s (actual 1.0×10⁻⁷); chloride ion penetration resistance (0–2 mm, 28 days) no more than 0.06 N/mm2; combustibility group NG; service in exposure classes X0, XC1-4, XD1-3, XS1-3, XF1-4 |
| Shelf life | 12 months from the date of manufacture in factory packaging in a dry room at relative humidity no more than 60 % |
| Standards | STO 56846022-004-2024 “Dry repair mixes”; GOST R 56378-2015 (declaration); declaration of conformity ROSS RU D-RU.RA01.V.38618/26; certificate of conformity to fire safety requirements RU C-RU.PB37.V.01230/24; SGR KG.11.01.09.008.E.000530.01.25 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Vetonit
Vetonit
Vetonit remokor L-45 — pourable non-shrink repair mortar, class R4
Class R4 flowable mix for concreting densely reinforced and prestressed structures in formwork where shotcrete is impossible; 45 MPa.
Price on request
Vetonit
Vetonit remokor LS-60 — rapid-hardening pourable R4 mortar for urgent repair
Rapid-hardening class R4 flowable mix for urgent repair of roads, airfields and floors; load after 2–3 h, work down to −10 °C.
Price on request
Vetonit
Vetonit remokor L-60 — high-strength flowable mortar, class R4
High-strength pourable class R4 mix for repairing bridge slabs, beams, roads, airfields and hydraulic structures; 60 MPa compressive at 28 days.
Price on request
Vetonit
Vetonit Remokor-Krit — polyurethane polymer concrete for expansion joints
Three-component polyurethane polymer concrete for transition zones and expansion joints of bridges and car parks; vehicle traffic after 4–6 h.
Price on request
Vetonit
Vetonit remokor NS-40 — fast class R3 finishing mortar for work in frost
Rapid-hardening fine-grained class R3 mix for urgent repair and finishing of reinforced concrete on walls and ceilings at temperatures down to −10 °C.
Price on request