Wetisol (INGRI)
WETISOL LAM 361 — polyurethane mastic for seamless waterproofing
Two-component hand-applied polyurethane mastic for concrete and metal: foundations, floor slabs, water bodies; elongation at least 60%.
Price on request
Wetisol (INGRI)
WETISOL INSEAL 180 GP — waterproofing admixture for concrete
The waterproofing properties are built into the concrete itself: WETISOL INSEAL 180 GP is added to the concrete mixer or truck mixer and mixed for 5–10 min. The water-based admixture forms crystals that close pores and microcracks up to 0.4 mm, raises the watertightness grade by at least 3 W steps, preserves vapour permeability and protects the reinforcement. It is used in residential, public and industrial buildings, hydraulic structures and wastewater treatment plants, filters, tanks and concrete products. It is compatible with plasticising and anti-freeze admixtures and is supplied in 10 and 20 kg canisters.
Specifications
| Manufacturer | Wetisol (INGRI) — OOO “Ingri” |
|---|---|
| Type | waterproofing material |
| Use | foundations and basements, tanks and pools, hydraulic structures and dams |
| Base | water-based crystalline waterproofing admixture for concrete mixes: a set of water-soluble compounds, surfactants, high-molecular organic compounds |
| Colour | viscous green liquid |
| Packaging | 10 kg and 20 kg canisters |
| Application method | added to the concrete mix at the batching stage: ready to use, when added to the concrete mixer (truck mixer) mix for 5–10 min, placing according to the rules for concrete works; makes it possible to dispense with additional waterproofing; compatible with plasticising, anti-freeze and other admixtures; effective only in cement-containing materials (weakly — in concretes with microsilica and polymer concretes, not applicable to gypsum and lime mortars) |
| Key properties | increase in the watertightness grade of treated concrete compared with untreated concrete by at least 3 W steps (with W ≤ 10 for control samples; per the TU method); crystals close pores and microcracks up to 0.4 mm; retains vapour permeability; increases strength by reducing the water-cement ratio; increases the corrosion resistance of concrete and protects the reinforcement; service in the pH range 3–14 |
| Consumption | 0.8–1.0% of the cement weight in the concrete mix or 4 kg per 1 m³ of concrete |
| Shelf life | 18 months from the date of manufacture indoors at −50…+50 °C in sealed packaging; freezes at 0…−2.5 °C — thaw gradually (heating through the container up to +50 °C is permitted) and stir |
| Standards | TU 24.66.47-096-94613022-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Wetisol (INGRI)
Wetisol (INGRI)
Wetisol S-CP — epoxy primer for polyurea
Two-component epoxy primer for concrete and brick under Wetisol Spray sprayed polyurea; adhesion to concrete over 4.0 MPa.
Price on request
Wetisol (INGRI)
Wetisol S-MP2 — zinc-rich primer for metal
Anti-corrosion zinc-filled polyurethane primer for steel before Wetisol polyurea: tanks, bridge supports, metal roofs, ships.
Price on request
Wetisol (INGRI)
WETISOL S-Wash — flushing compound for equipment and tools
Ethylene glycol ether flushing liquid for cleaning rigs and hoses immediately after spraying, and tools after LAM 361 mastic.
Price on request
Wetisol (INGRI)
WETISOL Ecto Block P — fibre-reinforced non-shrink joint compound
Thixotropic cement compound with polymer fibre for sealing static joints, abutments and cracks in concrete; watertightness W12.
Price on request
Wetisol (INGRI)
WETISOL I-5107 FG — polyurethane injection with adjustable reaction
Two-component polyurethane resin for soil stabilisation and sealing of joints and service penetrations; the reaction time is set by an accelerator.
Price on request