INDASTRO
Profskrin RC 451 RLq — flowable R4 repair mortar for fast-track work
Flowable R4 mortar for urgent repair of road slabs, platforms, track concrete and grouting under bridge bearings; from 15 MPa after 2 hours.
Price on request
INDASTRO
LEVELINE FP890 one-component polyurethane sealer — curing fresh concrete
The one-component polyurethane sealer is applied to freshly laid concrete or topping to reduce water evaporation while strength develops. The product is clear and can be applied at substrate temperatures from +5 to +35 °C; drying to degree 3 at +20 °C takes about 2 hours. The material is flammable: it must be applied without open flame and in a ventilated room. It is supplied in 23 kg containers.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics |
| Base | polyurethane, one-component |
| Colour | clear |
| Packaging | 23 kg |
| Application method | curing of freshly laid concrete and topping (reducing water evaporation) |
| Application temperature | substrate +5…+35 °C; application +5…+35 °C |
| Curing | drying to degree 3 at +20 °C — 2 hours |
| Key properties | Density 0.9-1.1 g/cm3; non-volatile content at least 21%; viscosity 14 ± 2 s (VZ-246, 4 mm nozzle) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Innolayn NC60 — cementitious grout for high-precision equipment installation
Cementitious grout for installing presses, machine tools, pumps and compressors, grouting under columns and repair by pouring; 60 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC35 — thixotropic R3 repair mortar for concrete and reinforced concrete
Thixotropic R3 cementitious mortar for structural repair of concrete and reinforced concrete in industrial buildings; compressive strength at 28 days from 35 MPa.
Price on request
INDASTRO
Profskrin RC30 PSm — fibre-reinforced finishing repair mortar with fine aggregate
Fibre-reinforced finishing mortar for repairing load-bearing, bridge and underground concrete structures; aggregate 0.315 mm, compressive strength 30 MPa at 28 days.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request
INDASTRO
LEVELINE FE850 two-component epoxy primer — for polymer floors
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.
Price on request