LEVL (INGRI)
LEVL Coat 318 — self-levelling epoxy floor
Gloss RAL epoxy coating for warehouses, workshops, car parks, healthcare and food production; Shore D hardness at least 75.
Price on request
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Ports, container yards, loading and unloading areas and car parks are the main field of application of LEVL CemPol 10. The stiff Portland cement mortar is laid wet-on-wet over a LEVL Prime Concrete bonding layer, levelled with a straightedge and floated by machine; falls can be formed with it. After 28 days compressive strength is at least 60 MPa, abrasion up to 0.4 g/cm², bond to substrate from 2 MPa, frost resistance at least F1 200. A natural and four coloured versions are available.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | Portland cement, modifying additives |
| Colour | natural, light grey, red, green, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner; 2.0–2.5 kg of water per bag |
| Application method | stiff mortar mix over a LEVL Prime Concrete bonding layer, wet-on-wet; straightedge + floating with a power trowel; falls can be formed; new floors and repair of old ones |
| Application temperature | air and substrate +5…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 60 minutes; light loads: +10 °C ~14 days, +20 °C ~7 days, +25 °C ~3 days; full strength gain ~28 / ~14 / ~7 days |
| Key properties | Compressive strength after 28 days at least 60 MPa; abrasion (wear) no more than 0.4 g/cm²; bond to substrate at least 2 MPa; frost resistance at least F1 200; mechanical loads: significant; service temperature from −40 °C to +60 °C; maximum aggregate size 7 mm |
| Layer thickness | from 15 to 50 mm (optimum from 20 mm) |
| Consumption | 2.1 kg/m²/mm (approximate) |
| Shelf life | 12 months; do not freeze |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST 13087, GOST 31356, GOST 10060; declaration ROSS RU D-RU.RA01.V.25307/19; SGR RU.77.01.34.008.E.000244.02.19 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Cure 100 — curing compound for fresh concrete and toppings
Film-forming solvent-based acrylic compound for curing freshly placed concrete and toppings; dries to degree 3 in no more than 2 h.
Price on request
LEVL (INGRI)
LEVL Coat 351 — elastic polyurethane self-levelling floor
Gloss, highly elastic RAL self-levelling coating that bridges cracks, for workshops, warehouses, offices and sports facilities.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Price on request
LEVL (INGRI)
LEVL RemTixo Rapid AF — thixotropic repair compound for work in frost
Rapid-hardening fibre-reinforced mix for repairing concrete in cold stores, on roads and airfields at air temperatures down to −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request