LEVL (INGRI)
LEVL Coat 307 — low-density epoxy self-levelling floor
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.
Price on request
LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
LEVL CemPol 30 mortar mix is used in two ways: as a stand-alone finishing coat or as a base for polymer and cementitious self-levelling floors. It is suitable both for new floors and for repairing old ones, and allows falls to be formed. After 28 days compressive strength is at least 40 MPa, abrasion up to 0.45 g/cm², bond to substrate from 2 MPa; the material is non-combustible (NG, KM-0). Colours: natural, light grey, red, green and dark grey.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | Portland cement, modifying additives |
| Colour | natural, light grey, red, green, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner; 2.0–2.5 kg of water per bag |
| Application method | mortar mix for a finishing coat or as a base for polymer/cementitious self-levelling coatings; falls; new floors and repair of old ones |
| Application temperature | air and substrate +5…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 60 minutes; light loads: +10 °C ~14 days, +20 °C ~7 days, +25 °C ~3 days; full strength gain ~28 / ~14 / ~7 days |
| Key properties | Compressive strength after 28 days at least 40 MPa; abrasion (wear) no more than 0.45 g/cm²; bond to substrate at least 2 MPa; mechanical loads: significant; NG, KM-0; service temperature from −40 °C to +60 °C |
| Layer thickness | 10–60 mm (optimum from 15 mm) |
| Consumption | 2.1 kg/m²/mm (approximate) |
| Shelf life | 12 months; do not freeze |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST 13087, GOST 31356; fire safety certificate No. C-RU.PB 58.V.02644 (NG, KM-0); declaration ROSS RU D-RU.RA01.V.25307/19 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL PoliCem PU 05 — polyurethane-cement primer for PoliCem systems
Three-component primer for sealing concrete pores under polyurethane-cement floors in food, pharmaceutical and chemical production.
Price on request
LEVL (INGRI)
LEVL Self 6 — cementitious levelling compound for work from +5 °C
Self-levelling compound under polymer and cementitious floors that can be laid at temperatures from +5 °C; bond to substrate 2 MPa.
Price on request
LEVL (INGRI)
LEVL RemTixo Finish 5 — cementitious filler for concrete surfaces
Thin-layer polymer-cement filler for levelling concrete and filling pores and cavities; bond to substrate at least 2.0 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 014 — highly filled polyurethane-cement floor
Thick-layer PU-cement coating for food and chemical production with impact and thermal loads, up to steam cleaning.
Price on request
LEVL (INGRI)
ZIVKON TE — TPO tape for expansion joints and cracks
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.
Price on request