LEVL (INGRI)
LEVL Top Silex — silicon carbide topping for industrial floors
Hardening topping with silicon carbide filler for floors under very significant loads; in natural colour, strength from 90 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 05 — polyurethane-cement primer for PoliCem systems
Laying of PoliCem polyurethane-cement floors starts with priming with LEVL PoliCem PU 05. The three-component material based on modified polyurethane, cement and aggregate seals concrete pores; it is applied with a flat trowel in two coats, filled with quartz sand. Substrate moisture must be no more than 6 % by weight, and the working temperature from +10 to +30 °C. Systems on this primer are used at food and pharmaceutical plants, in livestock farming, the chemical industry, workshops and warehouses.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | semi-matt grey primer |
| Packaging | 10 kg kit: A — metal pail 3.92 kg; B — plastic jerrycan 3.98 kg; C — paper bag 2.1 kg; A : B : C = 1.00 : 1.02 : 0.54 |
| Application method | priming and sealing of concrete pores under PoliCem coatings: 2 coats with a flat trowel, filled with 10–30 % quartz sand 0.1–0.3 mm |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % by weight |
| Curing | pot life +10 °C 20 min, +20 °C 15 min, +30 °C 10 min; recoat interval +10 °C ~24 h, +20 °C ~16 h, +30 °C ~12 h |
| Key properties | Density 1.20 ± 0.05 g/cm³; adhesion (cross-cut test) no more than grade 1; service temperature from −40 °C to +90 °C |
| Layer thickness | from 0.3 to 0.8 mm |
| Consumption | 0.4 kg/m² (+ quartz sand 0.1–0.3 mm 0.12 kg/m²) |
| Shelf life | 6 months; storage at +5…+25 °C, protect component C from moisture |
| Standards | TU 2257-021-94613022-2010; GOST 31992.1, GOST 15140 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 106M — water-based epoxy primer for fresh and damp concrete
Solvent-free primer for concrete aged from 7 days and damp substrates, a temporary moisture barrier under polymer coatings.
Price on request
LEVL (INGRI)
LEVL RemTixo Rapid — rapid-hardening thixotropic repair compound
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.
Price on request
LEVL (INGRI)
LEVL Top Cor — corundum topping for concrete floors
Dry hardening mix with corundum and quartz sand for workshops, warehouses and car parks; compressive strength at least 80 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL RemTixo Finish 5 — cementitious filler for concrete surfaces
Thin-layer polymer-cement filler for levelling concrete and filling pores and cavities; bond to substrate at least 2.0 MPa.
Price on request