LEVL (INGRI)
LEVL Coat 502 — clear epoxy layer for self-levelling 3D floors
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Price on request
LEVL (INGRI)
LEVL CemPol 50 “terrazzo” — cement mix for polished terrazzo floors
A polished “terrazzo” floor based on LEVL CemPol 50 is made from two parts: the cement mix (component A) and the decorative aggregate, which determines the colour. The mortar is laid over LEVL Coat 101 epoxy primer broadcast with sand, smoothed with a power trowel, then ground and polished. Compressive strength is at least 10 MPa after one day, 35 MPa after 7 days and 45 MPa after 28 days; the material is non-combustible. It suits retail, public and other interiors with decorative requirements.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | decorative, retail and public buildings |
| Base | Portland cement, modifying additives (component A) + decorative aggregate (component B) |
| Colour | depends on the choice of aggregate |
| Packaging | component A: 25 kg bag; decorative aggregate: in the producer's packaging; mixing ratio 1:1:0.15 (25 kg A : 25 kg B : 3.75 kg water) |
| Application method | over LEVL Coat 101 epoxy primer broadcast with sand; mortar placed by straightedge or vibrating screed, smoothed with a power trowel, then ground and polished (allowance ~2 mm) |
| Application temperature | air and substrate +5…+30 °C; material from +5 °C |
| Curing | pot life at +20 °C 30 minutes; compressive strength after 24 hours at least 10 MPa, after 7 days 35 MPa, after 28 days 45 MPa |
| Key properties | Compressive strength at least 10 / 35 / 45 MPa (24 h / 7 days / 28 days); density 2450 ± 100 kg/m³; non-combustible (NG); service temperature from −40 °C to +60 °C |
| Layer thickness | 10–50 mm; not less than 2.5 diameters of the coarse aggregate |
| Consumption | 2.1 kg/m²/mm (approximate); base mix 10.5–52.5 kg/m² + decorative aggregate 10.5–52.5 kg/m² for 10–50 mm |
| Shelf life | 12 months |
| Standards | TU 5745-025-94613022-10; GOST 310.4, GOST 5802, GOST 8735; combustibility group NG; not subject to mandatory fire safety certification |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 218 — high-gloss epoxy primer-enamel for floors
Thin-layer RAL paint coating for food, pharmaceutical and storage premises and car parks; service from −25 to +60 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
Textured polyurethane-cement coating without sand broadcast for wet food and chemical workshops; compressive strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Price on request
LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request
LEVL (INGRI)
LEVL Top Cor — corundum topping for concrete floors
Dry hardening mix with corundum and quartz sand for workshops, warehouses and car parks; compressive strength at least 80 MPa.
Price on request