LEVL Coat 102W — epoxy primer for damp and young concrete
Water-based solvent-free epoxy primer for concrete with moisture up to 10 % and age from 7 days; temporary moisture barrier under polymer floors.
LEVL RemTixo Grout AF pourable compound makes it possible to repair concrete in operating cold stores: work is permitted at air temperatures down to −10 °C. At sub-zero temperatures the mix is gauged with hot water and placed on a pre-heated substrate. Compressive strength is 25 MPa after 2 hours and 60 MPa after one day at +20 °C, and at −10 °C 15 MPa after 5 hours; at 28 days at least 75 MPa. Water impermeability W16, frost resistance F2300; the compound is also used on roads and airfields.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | special cements, modifying additives (pourable, non-shrink, rapid-hardening) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 2.8–2.9 kg of water per bag |
| Application method | pourable repair of concrete and reinforced concrete, including in operating cold stores; roads, airfields; at sub-zero temperatures: over a pre-heated substrate, mixed with hot water (+40…+60 °C) |
| Application temperature | air from −10 °C to +20 °C; substrate 0…+20 °C; material from +5 °C |
| Curing | pot life at +20 °C 15 minutes; compressive strength 25 MPa after 2 hours, 60 MPa after 24 hours (at +20 °C); at −10 °C: 15 MPa after 5 hours |
| Key properties | Compressive strength at least 25 / 60 / 75 MPa (2 h / 24 h / 28 days); flexural 4.5 / 8 / 12 MPa; bond at least 2.5 MPa; W16; F2300; Fkz100; service temperature from −40 °C to +60 °C |
| Layer thickness | 10–100 mm (thicker with coarse aggregate) |
| Consumption | 2.05 kg/m²/mm; 20.5–205 kg/m² for 10–100 mm |
| Shelf life | 6 months |
| Standards | TU 5745-025-94613022-10 with Amendment No. 2; GOST 310.4, GOST R 58277, GOST 12730.5, GOST 10060; not subject to fire certification |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based solvent-free epoxy primer for concrete with moisture up to 10 % and age from 7 days; temporary moisture barrier under polymer floors.
Three-component primer for sealing concrete pores under polyurethane-cement floors in food, pharmaceutical and chemical production.
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Thixotropic epoxy paste with quartz filler for levelling and sealing substrate pores before polymer coatings; adhesion 2.5 MPa.
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.