LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
Textured polyurethane-cement coating without sand broadcast for wet food and chemical workshops; compressive strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 106M — water-based epoxy primer for fresh and damp concrete
Fresh concrete aged from 7 days or a damp substrate can be primed with LEVL Coat 106M water-based epoxy compound. It serves as a temporary moisture barrier under epoxy, polyurethane and acrylic coatings and contains no organic solvents. Two or more coats are applied by roller or brush without dilution; the next coat after 12–24 hours, tools are washed with water. Adhesion to concrete is over 4.0 MPa; without waterproofing of the substrate, delamination of the coating is possible, which should be taken into account at the design stage.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Base | two-component water-based epoxy primer; no organic solvents |
| Colour | comp. A: white liquid; comp. B: light yellow liquid |
| Packaging | 10 kg (components A and B in two separate containers); A : B = 2 : 1 (by weight) |
| Application method | primer for fresh (from 7 days) or damp concrete substrates, temporary moisture barrier under epoxy, polyurethane and acrylic coatings; velour roller, brush, 2 or more coats; next coat after 12–24 h; must not be diluted; tools are cleaned with water |
| Application temperature | air and substrate +10…+30 °C; air humidity no more than 80 %; substrate visually dry (no darkening) |
| Curing | walkable: +10 °C 12 h, +20 °C 7 h, +30 °C 5 h; light loads 7 / 5 / 3 days; full loads 12 / 7 / 5 days |
| Key properties | Adhesion to concrete > 4.0 MPa (failure in the concrete); non-volatile content 63 ± 2 %; mix density 1.05 g/cm³; pot life +10 °C 40 min, +20 °C 30 min, +30 °C 20 min |
| Consumption | 100–250 g/m² per coat |
| Shelf life | 6 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 2316-003-94613022-06; works per SP 29.13330.2011, SNiP 3.04.01-87; test methods GOST 28513-90, GOST 25271-93, GOST 28574-90, GOST R 52487-2005 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 24 — lithium impregnation concentrate for concrete
Lithium silicate concentrate diluted with water 1:1 and used for hardening and dustproofing concrete and polished floors.
Price on request
LEVL (INGRI)
LEVL Coat 202 W — water-based vapour-permeable epoxy floor paint
Matt water-based epoxy coating for wet rooms, food and pharmaceutical production and fresh concrete; adhesion over 4 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 014 — highly filled polyurethane-cement floor
Thick-layer PU-cement coating for food and chemical production with impact and thermal loads, up to steam cleaning.
Price on request
LEVL (INGRI)
LEVL Coat 161 — polyurethane hardening impregnation for concrete
One-component impregnation for weak porous mineral substrates; applied at air temperatures down to −10 °C, service from −60 °C.
Price on request