Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 104 RAPID — fast epoxy primer for polymer floors
LEVL (INGRI)

LEVL Coat 104 RAPID — fast epoxy primer for polymer floors

Floor primers

LEVL Coat 104 RAPID primer is distinguished by accelerated curing: at +20 °C it can be walked on after about 6 hours, and it reaches full strength in 12 hours. The two-component epoxy resin serves as a universal primer under LEVL epoxy and polyurethane floors and, with quartz sand, as a filler. It is also used for injecting voids and for bonding glass mat when reinforcing cracked concrete of class B20 and above. Adhesion to concrete after one day is at least 2.5 MPa, service from −10 to +60 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typefloor primers
Basetwo-component epoxy resin with accelerated curing
Colourcontinuous yellowish gloss layer
Packagingkits of 10 kg and 20 kg (A and B in two containers); A : B = 1.94 : 1 (by weight)
Application methoduniversal fast primer under LEVL epoxy and polyurethane floors (velour roller, flat trowel, brush or air spraying; 2 or more coats; quartz sand broadcast 0.3–1.0 kg/m²); filler compound with sand; injection compound for voids in concrete and reinforced concrete; bonding and filling of glass mat when reinforcing cracked concrete of class B20 (M250) and above
Application temperatureambient and substrate +10…+30 °C; material +15…+30 °C (recommended 17–23 °C); air humidity no more than 80 %; substrate moisture no more than 5.0 % by weight; 3 °C above the dew point
Curingfoot traffic: +10 °C ~12 h, +20 °C ~6 h, +30 °C ~4 h; light loads ~16 / ~8 / ~6 h; full strength gain ~24 / ~12 / ~8 h; next coat after 6–48 h at +20 °C
Key propertiesAdhesion to concrete at least 2.5 MPa (after 1 day); mix density 1.06 ± 0.05 kg/l; non-volatile content at least 96 % by weight; viscosity of A+B (at +23 °C) 500–900 mPa·s; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; service temperature from minus 10 to +60 °C (short-term up to +90 °C)
Consumption100–250 g/m² per coat; priming of a cementitious substrate 0.30 kg/m² + quartz sand 0.5 kg/m²; filling 0.5 kg/m² + sand 0.8 kg/m²; glass-mat reinforcement: primer 0.30 kg/m² + adhesive layer 0.80 kg/m² + filling 0.30 kg/m² (glass mat 225 g/m²)
Shelf life12 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2312-001-94613022-06 with Amendment No. 1; not subject to mandatory certification (fire safety); substrate per SP 71.13330.2017; test methods GOST 31992.1, GOST R 31939, GOST 25271, GOST 28574

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)