LEVL (INGRI)
LEVL Coat 102W — epoxy primer for damp and young concrete
Water-based solvent-free epoxy primer for concrete with moisture up to 10 % and age from 7 days; temporary moisture barrier under polymer floors.
Price on request
LEVL (INGRI)
LEVL Coat 501 — clear epoxy binder for decorative floors
The colour of a decorative floor on LEVL Coat 501 is set by coloured quartz sand, while the clear epoxy binder locks it in and gives gloss. The main layer is spread with a squeegee and broadcast with coloured sand, then the finishing layer is applied with a polyurethane trowel; the substrate is first primed with LEVL Coat 101 or 108. The coating is high-strength and chemically resistant, adhesion to concrete at least 2.5 MPa, fire hazard class KM2. Work is carried out at temperatures from +15 to +30 °C.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | epoxy floors |
| Use | decorative, chemically resistant |
| Base | epoxy resin, functional additives, polyamine hardener; clear, two-component |
| Colour | clear gloss coating (the colour comes from coloured quartz sand) |
| Packaging | kit (A+B) 20 kg: A — 20 l metal pail of 12.8 kg; B — 10 l jerrycan of 7.2 kg; A : B = 1.79 : 1 (by weight) |
| Application method | binder for high-strength coatings reinforced with coloured quartz sand and for decorative screeds: main layer by squeegee with back-rolling, broadcast of coloured sand, finishing layer with a polyurethane trowel; over LEVL Coat 101/108 (or 102W/106M) primer |
| Application temperature | air +15…+30 °C (recommended +20…+25 °C); substrate +15…+30 °C; material +15…+30 °C (recommended +15…+25 °C); air humidity up to 80 %; substrate moisture no more than 5 % (primers 101/108) or 10 % (102W/106M); 3 °C above the dew point |
| Curing | light foot traffic: +15 °C 48 h, +20 °C 36 h, +30 °C 24 h; light loads 6 / 4 / 2 days; full strength gain 10 / 7 / 5 days; finishing layer 12–36 h after the main layer |
| Key properties | Adhesion to concrete at least 2.5 MPa; relative elongation at break at least 7 %; ultimate strength at maximum load 7 MPa; density of A+B 1.08 ± 0.05 g/cm³; non-volatile content at least 97 %; chemical resistance; pot life +15 °C 60 min, +20 °C 50 min, +30 °C 20 min; service temperature from −10 to +60 °C (highly filled: short-term up to +90 °C); class KM2 |
| Layer thickness | coating thickness 1.5–3.0 mm; in highly filled systems 3.0–12.0 mm |
| Consumption | theoretical 1.08 kg/m² at 1 mm thickness; highly filled textured 3–12 mm: LEVL Coat 501 main layer 1.5 kg/m² + coloured quartz sand (0.8–1.2 / 0.1–0.3 mm = 3 : 1) 6 kg/m² + finishing layer 0.3 kg/m² |
| Shelf life | 6 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 2257-006-94613022-06 with Amendment No. 1; fire safety KM2 (V2, T1, D2, RP1), No. 123-FZ; substrate per SP 29.13330.2011, SP 71.13330.2017 (Tables 8.11, 8.12); test methods GOST 31992.1, GOST R 31939, GOST 11262, GOST 28574 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 358 — highly elastic polyurethane self-levelling floor
Single-layer PU coating that bridges concrete cracks, for workshops, warehouses, energy and transport facilities; elongation at break from 50 %.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
Textured polyurethane-cement coating without sand broadcast for wet food and chemical workshops; compressive strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 071 Tixo — thixotropic additive for MMA and polymer compounds
Polyethylene fibres that make carboacrylates, adhesives, sealants and coatings thixotropic; chemically resistant, asbestos-free additive.
Price on request
LEVL (INGRI)
LEVL Coat 315 TIXO — textured non-slip epoxy coating
Relief thin-layer RAL epoxy coating for warehouses, workshops, car parks and wet rooms where a non-slip floor is needed.
Price on request
LEVL (INGRI)
LEVL CemPol 40 — thin-layer self-levelling screed for indoor use
Rapid-hardening self-levelling coating on special cements for indoor use only; compressive strength 40 MPa, flexural strength 8 MPa.
Price on request