Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Monopol Policrete 306 AS — conductive polyurethane-cement floor
Monopol

Monopol Policrete 306 AS — conductive polyurethane-cement floor

Polyurethane-cement floors

Policrete 306 AS contains conductive fibres and is laid as the finishing layer of a conductive system: Policrete 100 primer, copper tape, Monopol Epoxy 4W AS conductive primer and then the pour. The resistance between the surface and the earthing system is below 10⁹ Ω. Compressive strength at least 58 MPa, Shore D hardness from 81, slip resistance R10. It contains no solvents; the base colour is grey, and custom colours are possible. Areas of use: chemicals, pharmaceuticals, explosion-hazard production sites and warehouses, agribusiness.

Specifications

ManufacturerMonopol — OOO “TEKHBETON”
Typepolyurethane-cement floors
Useantistatic/conductive, chemically resistant, food and pharmaceutical, production workshops
Basepolyurethane resin with mineral filler and conductive fibres; free of organic solvents
Colourgrey (custom colours available)
Packaging17.3 kg: component A 2.5 kg + B 2.8 kg + C 12.0 kg + pigment paste 150 ml
Application methodconductive system: Monopol Policrete 100 primer (400-600 g/m²) → copper tape → Monopol Epoxy 4W AS conductive primer (no more than 0.1 kg/m²) → Policrete 306 AS pour 3-6 mm
Application temperaturesubstrate temperature at the time of application from +10 °C to +25 °C; relative air humidity no more than 80%; substrate moisture no more than 12%; substrate no lower than M300, substrate pull-off strength at least 2.0 MPa
CuringAt +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days
Key propertiesResistance between the surface and the earthing system < 1*10^9 Ω; compressive strength at least 58 MPa; flexural strength at least 18 MPa; impact toughness 8.1 J/cm²; abrasion no more than 0.1 g/cm²; Shore D at least 81; R10; adhesion > 4.5 MPa (cohesive failure in concrete)
Consumptionfrom 1.9 kg/m² per 1 mm of layer thickness
Shelf life12 months from the date of manufacture (original packaging)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Monopol