Monopol Epoxy 4W AS — conductive primer for antistatic polyurethane-cement floors
Conductive water-based epoxy primer for Policrete 306 AS antistatic floors in cleanrooms, pharmaceuticals and chemicals; below 10⁶ Ω.

The universal water-dispersion compound Epoxy 3W works as a paint, as a primer under self-levelling floors and as a hardening impregnation; it is the primer used under Monopol Epoxy 5W. It contains no solvents, is thinned with water and can be applied to a damp substrate, while its vapour permeability makes waterproofing of the substrate unnecessary. The coating is matt, spark-safe and highly chemically resistant; foot traffic is possible after 12 hours at +20 °C. Besides floors, it is used to protect tanks, channels, pipelines and tunnels.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, chemically resistant, wet premises |
| Base | water-dispersion epoxy paint-primer; free of organic solvents |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 12 kg: component A 10 kg + component B 2 kg (plastic pails) |
| Application method | paint, primer under self-levelling floors and hardening impregnation, thinned with water; can be applied to a damp substrate; second coat 0.15-0.2 kg/m²; primer under Monopol Epoxy 5W |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate no lower than M200, adhesion at least 2.0 MPa |
| Curing | at 20 °C: foot traffic 12 h, light vehicle traffic 72 h, full vehicle load 7 days |
| Key properties | Taber 50 mg; density 1.2 - 1.4 g/cm³; non-volatiles 68%; spark-safe; matt; vapour-permeable (no substrate waterproofing required); pot life at 23 °C at least 30 min (without water), at least 45 min (with water); high chemical resistance |
| Consumption | first coat 0.2 - 0.3 kg/m²; second coat 0.15 - 0.2 kg/m² |
| Shelf life | 12 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Conductive water-based epoxy primer for Policrete 306 AS antistatic floors in cleanrooms, pharmaceuticals and chemicals; below 10⁶ Ω.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.