TAIKOR (TECHNONICOL)
TN-POL TAIKOR Decor system — coloured thin-layer floor for production premises
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Primer 210 primer for mineral substrates — dustproofing and hardening
The one-component Primer 210 based on an organic prepolymer penetrates deep into concrete and can work on its own — as a dustproofing and hardening coating for mineral substrates — or as a primer under TAIKOR Elastic 300 waterproofing. The coating is functional, not decorative. It is applied in one coat by brush, roller or spraying, including at sub-zero air temperatures down to −10 °C. Adhesion to concrete at least 2 MPa, water impermeability at least 16 atm, no chloride penetration, service from −40 to +90 °C.
Specifications
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor primers |
| Use | production workshops, retail and public, wet premises |
| Base | one-component deep-penetrating primer based on an organic prepolymer; non-volatiles 49-51 % |
| Colour | clear, light yellow |
| Packaging | net weight 16 kg |
| Application method | on its own — dustproofing and hardening of mineral substrates (TN-POL TAIKOR Light system); primer under TAIKOR Elastic 300 waterproofing; brush, roller, spraying, 1 coat to a slight gloss; mix at no more than 150 rpm; substrate moisture no more than 4 % |
| Application temperature | air -10…+35 °C (per TI-POL-26 +5…+35 °C is recommended, lower — by agreement with the manufacturer) |
| Curing | interval before the next coating 3-24 h; light load at least 72 h, full load at least 7 days at (20±2) °C |
| Key properties | Adhesion to concrete at least 2 MPa; chloride permeability — none; CO2 permeability 0.14·10-4 cm2/s; water impermeability at least 16 atm; service temperature -40…+90 °C, temporarily up to +180 °C; density 0.97-0.99 kg/l; with Elastic 300: V1, D2, T2, RP1 |
| Consumption | mineral substrates 0.200-0.300 kg/m2; in the TN-POL TAIKOR Light system 0.200-0.600 kg/m2 |
| Shelf life | 12 months; storage and transport -35…+35 °C |
| Standards | STO 72746455-3.6.1-2015; methods GOST 31383, GOST 28574; TN VED EAEU 3208 90 9109 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by TAIKOR (TECHNONICOL)
TAIKOR (TECHNONICOL)
TN-POL TAIKOR Quartz system — thin-layer wear-resistant floor with quartz
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Price on request
TAIKOR (TECHNONICOL)
TN-POL TAIKOR Light system — dustproofing and hardening a concrete floor
Impregnation of a concrete floor with TAIKOR Primer 210 for dustproofing and hardening; all-season application at temperatures from −10 to +35 °C.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Floor 720 self-levelling compound — elastic polyurethane floor
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Top 425 polyurethane finishing enamel — UV-resistant floor finish
Light- and weather-resistant polyurethane enamel for thin-layer floors in car parks, warehouses, stands and outdoor areas; winter version applied down to −10 °C.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Floor 710 self-levelling compound — epoxy self-levelling floor
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
Price on request