TN-POL TAIKOR Light is a single-material system: the TAIKOR Primer 210 impregnation forms a polymer layer within the concrete, dustproofs and hardens the floor and protects it from moisture. It is suitable for premises with modest requirements for functionality and appearance, serves as a stand-alone coating in secondary rooms without permanent occupancy and as substrate preparation for floors in public and commercial buildings. It can be applied all year round, at temperatures from −10 to +35 °C, on concrete at least 28 days old.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, retail and public, wet premises |
| Base | one-component TAIKOR Primer 210 impregnation (organic prepolymer) — the only layer of the system |
| Colour | clear yellow |
| Application method | dustproofing and hardening of concrete floors: TAIKOR Primer 210 by airless/pneumatic spraying, brush or roller evenly to a slight gloss; concrete at least 28 days old, moisture no more than 4 %, strength at least 15 MPa; additional coat after 3-24 h |
| Application temperature | permitted from -10 to +35 °C |
| Curing | interval between coats 3-24 h (Primer 210: light load at least 72 h, full at least 7 days) |
| Key properties | Forms a polymer layer within the concrete; dustproofing, hardening, moisture protection; material properties — see TAIKOR Primer 210 (adhesion to concrete at least 2 MPa, water impermeability at least 16 atm, service -40…+90 °C) |
| Consumption | TAIKOR Primer 210 0.200-0.600 kg/m2 |
| Standards | TI-POL-26 (OOO TECHNONICOL – Construction Systems, edition 02, November 2025); STO 72746455-3.6.1-2015; design per SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
Antistatic polyurethane self-levelling floor for explosion-hazard production, electronics, laboratories, car services and filling stations; no more than 10⁶ Ω.
Epoxy self-levelling floor system based on TAIKOR Primer 160 and Floor 710 for sales floors, medicine, schools, car parks, warehouses and food workshops.
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Light- and weather-resistant polyurethane enamel for thin-layer floors in car parks, warehouses, stands and outdoor areas; winter version applied down to −10 °C.
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
