GLIMS
GLIMS® CRT-40 AF — winter thixotropic R3 mortar for repair at −15…+15 °C
Coarse-grained thixotropic R3 mortar for repairing concrete, steps and stair flights at temperatures from −15 to +15 °C; W12, F2 300.
Price on request
GLIMS
GLIMS® PRO Cure-A — curing impregnation for concrete
Cure-A is used in two modes: it is sprayed under the blades of a power trowel when working with TOP 450 and TOP 100 toppings, or applied to already dry concrete by brush, roller or sprayer. The latex impregnation, free of organic solvents, prevents water evaporation, dustproofs the surface, increases its abrasion resistance and reduces absorption of oils and petroleum products. The compound must be stored and applied at +5…+35 °C and must not be frozen.
Specifications
| Manufacturer | GLIMS — AO “GLIMS-Production”, Podolsk |
|---|---|
| Type | floor material |
| Use | warehouses and logistics, production halls, car parks and ramps, outdoor areas |
| Base | waterborne latex (acrylate) polymer curing impregnation, free of organic solvents |
| Colour | white |
| Packaging | plastic canister 10 kg |
| Application method | sprayed under the blades of a power trowel when working with TOP 450 / TOP 100 toppings (0.1–0.2 kg/m²) or impregnation of finished dry concrete by brush, roller, sprayer (0.1–0.3 kg/m²) |
| Application temperature | +5…+35 °C (substrate and air) |
| Key properties | density 1.05 g/cm³; service temperature −50…+70 °C; prevents water evaporation, dustproofs, increases abrasion resistance, reduces absorption of oils and petroleum products |
| Consumption | 0.1–0.3 kg/m² (with topping — 0.1–0.2 kg/m²) |
| Shelf life | 12 months; store at +5…+35 °C, protect from freezing and sunlight |
| Standards | TU 5775-007-40397319-2004 No. G-7010 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request