TECHNONICOL
ECOBASE V-ST PVC waterproofing membrane — textured, for two-layer systems
PVC membrane with a textured side for the second layer of two-layer waterproofing of underground structures with leak-tightness monitoring.
Price on request
TECHNONICOL
AquaMast universal bituminous waterproofing — water-based paste
The universal water-based, solvent-free AquaMast paste works outside and inside buildings: on foundations, on floors of residential premises, and for anti-corrosion and anti-capillary protection of concrete. It goes onto sand-lime brick, aerated concrete and foam concrete, concrete, lime-cement plaster, timber and old bituminous coatings, and if necessary can be diluted with water in any proportion. The coating becomes watertight after 8 h at +20 °C and reaches its final properties after 3–4 days. The paste is not used on roofs; it is applied by spatula or float at +5…+40 °C.
Specifications
| Manufacturer | TECHNONICOL — OOO “Zavod Technoflex”, Voskresensk |
|---|---|
| Type | mastics and liquid membranes |
| Use | foundations and basements, interior spaces |
| Base | ready-to-use water-based bitumen-polymer paste mastic, solvent-free |
| Application method | coating waterproofing inside and outside buildings: foundations, floors inside residential premises, anti-corrosion and anti-capillary protection of concrete; on sand-lime brick, aerated concrete, foam concrete, concrete, lime-cement plaster, old bituminous coatings, timber; by spatula or float, thicker coats on vertical surfaces in a single application, not more than 3 mm per coat, the second coat after the first has dried; surface defects — repair mix of paste : moistened sand (or cement-sand mix) 1:1; absorbent surfaces — AquaMast universal bitumen primer; dilution with water in any proportion is permitted (use within 12 h); protect from rain until dry; fill shrinkage cracks with the paste; do not use on roofs |
| Application temperature | from +5 to +40 °C; substrate not below +5 °C; mastic not below +20 °C during application |
| Curing | watertight after 8 h at +20 °C and normal humidity; final properties after 3–4 days |
| Key properties | density 1250 ±50 kg/m³ (GOST 3900-2022); bond strength to concrete at least 0.2 MPa (GOST 26589-94); watertightness at a pressure of 0.03 MPa for 10 min — passes; heat resistance up to +140 °C; resistance to aggressive substances in the ground; combustibility group G4 (GOST 30244-94), ignitability V3 (GOST 30402-96), flame spread RP4 (GOST R 51032-97); not classified as dangerous goods |
| Layer thickness | not more than 3 mm per coat |
| Consumption | foundations at least 3 kg/m²; floors inside residential premises at least 2 kg/m²; anti-corrosion and anti-capillary protection of concrete at least 1 kg/m² |
| Shelf life | 18 months from the date of manufacture; store at +5…+35 °C, frost-resistant — a drop to −5 °C for not more than 3 days is permitted; pallets in a single tier |
| Standards | TU 23.99.12-124-72746455-2018; GOST 30693-2000 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by TECHNONICOL
TECHNONICOL
TECHNONICOL No. 24 (MGTN) waterproofing mastic — bituminous, for foundations
Cold bituminous mastic for concrete, reinforced concrete and timber structures buried in the ground; applied at −20…+40 °C, not for roofs.
Price on request
TECHNONICOL
ECOBASE V-SL PVC waterproofing membrane — with signal layer
PVC membrane for foundations, tunnels and anti-seepage liners of ponds and canals, a more affordable alternative to LOGICBASE V-SL.
Price on request
TECHNONICOL
MBR hot bitumen-rubber mastic (grades 65, 75, 90, 100) — GOST 15836-79
Hot mastic of bitumen and crumb rubber for protection of underground pipelines, roof joints and structures in the ground; four grades.
Price on request
TECHNONICOL
AquaMast cold bituminous mastic for roof repair and waterproofing
Cold bituminous mastic in a 3 kg pail for spot repair of roll and mastic roofs and for bonding bituminous materials to various substrates.
Price on request
TECHNONICOL
LOGICBASE V-ST PVC waterproofing membrane — textured, for the second layer
PVC membrane with a textured surface for the second layer of two-layer waterproofing systems for underground structures with leak-tightness monitoring.
Price on request